The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X70-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 70mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X70-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 20-70 mm, letting you dial back the 70 mm nominal stroke by up to 50 mm during commissioning.
The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement. The carbon steel rod and M16x1.5 thread handle moderate side loads well, while the PT tapered ports ensure a tight pneumatic connection.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X70-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt the 20-70 mm travel window for different part sizes on a machining line without changing the cylinder.
Fine-tune the retract end-position during machine setup to achieve perfect alignment without external stopper hardware.
Adjust the stroke length on the fly to accommodate varying package dimensions on a packaging conveyor system.
If you need less force, step down to the 40 mm bore providing 628 N; if your load is heavier, the 63 mm bore yields 1559 N. The 50 mm adjustment range is ideal for product changeovers, allowing you to fine-tune the retract end-position without swapping cylinders or adding external stops.
When ordering an ISO 15552 replacement, match the 50 mm bore, 70 mm stroke, 50 mm adjustment code, PT G1/4 ports, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting set. This plain SAIJ model lacks a magnet; adding the -S suffix enables CMSE reed and DMSE electronic sensors. Remember that the rear adjuster is a travel stop, not a lock—use SAIL or BSAI cylinders if you need to hold loads without live air pressure.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 70 mm nominal stroke by up to 50 mm, giving an effective travel range of 20-70 mm. The air cushion and stopper only decelerate the load; they do not hold it without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.