
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X700-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X700-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 50 mm adjustment range, allowing you to fine-tune the effective travel down from the 700 mm nominal stroke to a precise 650-700 mm window.
This model features a carbon steel piston rod with an M16x1.5 thread, paired with PT tapered port threads and a G1/4 air connection. The extruded aluminum barrel includes sensor grooves on both sides. Because this SKU lacks a magnet, you would need the -S variant to utilize AirTAC CMSE reed or DMSE electronic solid-state sensors.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X700-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 650-700 mm travel window during format changes on packaging lines, using the rear screw to set new end positions rapidly without changing the cylinder.
Pushes or diverts items across wider conveyor belts, using the 50 mm adjustment range to fine-tune the exact push distance based on varying product widths.
Choose this 50 mm bore when an application requires moderate thrust—such as 982 N at 0.5 MPa—but would be overpowered by the 63 mm bore which outputs 1559 N at the same pressure. The 50 mm adjustment window is ideal for product-size changeovers on a line, letting you dial in the exact end position at commissioning without adding external stops or swapping a fixed-stroke SAI cylinder. For a direct ISO 15552 replacement, match the 50 mm bore, 700 mm stroke, PT port thread, and your required mounting kit.
With a 700 mm stroke, the M16x1.5 rod is subjected to greater leverage under side loading. An external guide mechanism is strongly recommended to prevent rod bending and premature seal wear. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true pneumatic locking without pressure, consider the SAIL or BSAI series instead.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster acts as an external stopper that allows you to shorten the effective travel from the 700 mm nominal stroke down to 650 mm. It is a mechanical stop for end-position tuning, not a lock, and the cylinder remains double-acting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.