
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X75-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 75mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X75-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 75 mm stroke that can be dialed back by up to 50 mm, creating a usable travel window of 25 to 75 mm.
Equipped with a -S magnet, it supports CMSE reed and DMSE electronic sensors housed within the dual-side barrel grooves. The carbon steel rod uses an M16x1.5 thread, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear stopper acts solely as a travel limit, so a SAIL or BSAI lock is required if you need to hold loads without live air pressure.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X75-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 25 to 75 mm retract distance instantly when switching a packaging line to a different carton size.
Fine-tune the end-stop during initial commissioning to absorb mechanical tolerances without machining new spacer blocks.
Adjust the travel limit on the fly for multi-product assembly lines requiring different insertion depths.
An adjustable stroke is selected over a fixed SAI when you need to fine-tune the retract end-position during commissioning or product changeovers without adding external stops. To match this ISO 15552 cylinder, specify a 50 mm bore, 75 mm stroke, 50 mm adjustment, PT tapered ports, and the -S magnet option.
Because the stroke is under 300 mm, side-load stress on the M16x1.5 rod is minimal, though an external guide remains good practice for heavy lateral loads. Remember that the rear adjuster only sets the travel end; it is not a brake, so it will not hold a load safely without continuous air pressure.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 200 kgf.
The rear adjuster screw lets you shorten the 75 mm nominal stroke by up to 50 mm, giving an effective travel window of 25 to 75 mm. This allows precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.