
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X95-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X95-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel by up to 10 mm. This creates an 85-95 mm usable stroke window, providing immediate end-position tuning at commissioning without swapping hardware or adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors if a magnet is added later. The rear adjuster functions purely as a travel stop and works alongside the standard air cushions to decelerate the load, but it will not hold the load statically without live air pressure. For position holding, consider the SAIL or BSAI series.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X95-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 85-95 mm end-of-stroke position during commissioning without machining external stopper blocks.
Quickly adjust the retract distance on a production line when swapping to a slightly shorter product format.
Use the rear screw to set precise retraction limits for delicate pressing or positioning tasks.
The adjustable stroke is ideal for product changeovers or fine-tuning machine setup, offering flexibility that a fixed-stroke SAI cylinder cannot match.
When replacing an ISO 15552 cylinder, match the 50 mm bore, 95 mm stroke, 10 mm adjustment range, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is under 300 mm, side-load stress is minimal, but always ensure the M16x1.5 rod thread is properly aligned to prevent premature seal wear.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw lets you shorten the nominal 95 mm stroke by up to 10 mm, creating an 85-95 mm travel window. It acts as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.