
The AirTAC SAIJ50 Adjustable Cylinder SAIJ50X95-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ50X95-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 95 mm nominal stroke that can be fine-tuned down by up to 40 mm, providing a usable travel window of 55 to 95 mm.
This adjustable design allows you to set exact retract end positions during commissioning without swapping cylinders or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for dead-air locking, consider SAIL or BSAI variants. It supports AirTAC CMSE reed and DMSE electronic sensors, operating at speeds of 30-800 mm/s with PT tapered ports.
| Model | Airtac SAIJ50 Adjustable Cylinder SAIJ50X95-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-95 mm retract position precisely when switching product sizes on a packaging line, avoiding the need to physically swap out cylinders.
Fine-tune the final end-of-stroke position during machine commissioning to perfect seating or clamping forces without installing external mechanical stops.
Leverage the integrated magnet with DMSE electronic or CMSE reed switches to confirm position across the adjusted travel window.
The 40 mm adjustment range is perfect for product changeovers requiring variable end stops, offering flexibility a fixed SAI cylinder cannot match. To replace an ISO 15552 cylinder, match the 50 mm bore, 95 mm stroke, PT port threads, and the -S magnet requirement.
Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Although the 95 mm stroke is relatively short, always ensure adequate external guiding if the load imposes significant side loads on the M16x1.5 rod thread.
Quick checklist
At 0.7 MPa, the push force increases to 1374 N.
The rear adjuster screw allows you to shorten the 95 mm nominal stroke by up to 40 mm, creating a usable travel window of 55 to 95 mm. This stopper only sets the travel end and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.