Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S
The AirTAC Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 115mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke115 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S
The AirTAC SAIJ63X115-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 115 mm stroke that can be dialed back by up to 100 mm, creating a highly versatile 15-115 mm usable travel window. This wide adjustment range is ideal for prototyping and machine setups where the exact end position needs fine-tuning at commissioning without swapping cylinders. Delivering 1559 N of pull force at 0.5 MPa, it handles robust actuation tasks.
This model includes a magnet for position sensing and uses a SUS420J2 stainless steel rod for enhanced durability against minor corrosion or scoring. The extruded aluminum barrel features sensor grooves on both sides, supporting AirTAC CMSE reed and DMSE solid-state switches. It offers a G3/8 port and variable air cushions at both ends to decelerate the load, though the rear stopper and cushions do not hold the load without live air pressure.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S Technical Specifications
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S Is Used
Machine Changeover
Dial in the 15-115 mm travel window during product size transitions without physically replacing the actuator or adding external stops.
Prototyping Setup
Fine-tune the exact end position at commissioning to find the optimal stroke distance for a new assembly process.
Variable End Stops
Adjust the rear stopper screw on the fly to accommodate varying material thicknesses or positioning requirements on the fly.
Is the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S the Right Cylinder?
Choose this 63 mm bore when your application requires 1559 N pull force at 0.5 MPa (or 2182 N push at 0.7 MPa) alongside extreme stroke flexibility. If you need less force, stepping down to a 50 mm bore yields 825 N pull, whereas an 80 mm bore provides 2268 N pull for heavier loads. The SAIJ63X115-100-S is selected over a fixed SAI cylinder when you need a variable end-stop for product changeovers. Because the stroke is 115 mm, an external guide is not strictly required, but always ensure the load is supported to prevent rod side-loading.
For ISO 15552 replacement matching, specify a 63 mm bore, 115 mm nominal stroke, 100 mm adjustment range, PT tapered G3/8 port, and the -S magnet option. Mounting options include the reduced SAIJ set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Remember that the rear adjuster acts as a travel stop, not a lock; for true load-holding without live air, select an SAIL or BSAI cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S FAQ
At 0.5 MPa operating pressure, this 63 mm bore cylinder provides 1559 N of pull force and 1402 N of push force. At 0.7 MPa, the push force increases to 2182 N.
The rear adjuster screw allows you to trim the 115 mm nominal stroke back by up to 100 mm, giving a usable travel window of 15-115 mm. The adjuster acts as a mechanical stop to set the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX115-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.