Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10
The AirTAC Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 130mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke130 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10
The AirTAC SAIJ63X130-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 120-130 mm usable travel window. Delivering 2182 N of push force at 0.7 MPa, it integrates an extruded aluminum barrel with sensor grooves on both sides. The piston rod utilizes SUS420J2 stainless steel, offering solid corrosion resistance for demanding industrial environments.
This variant features PT tapered port threads and lacks a standard magnet. The rear adjustment screw functions strictly as a mechanical stop to trim the retract end-position during commissioning. It does not lock the load without live air pressure; for positive holding, an external SAIL or BSAI locking cylinder is required.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10 Technical Specifications
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10 Is Used
End-Position Tuning
Fine-tune the retract distance by up to 10 mm during machine setup to perfectly align tooling without swapping cylinders.
Product Changeover
Quickly adapt the 120-130 mm travel window on packaging lines when handling slightly different carton or part sizes.
Assembly Actuation
Provides 2182 N of push force at 0.7 MPa for pressing or clamping components, with the adjuster acting as a hard stop.
Is the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10 the Right Cylinder?
Choose this 63 mm bore when an application requires more thrust than a 50 mm bore (which provides 1374 N at 0.7 MPa) but less bulk than an 80 mm option. The 10 mm adjustment range is ideal for dialing in exact end-of-stroke positions during machine changeovers without adding external stops. Since the total stroke is 130 mm, side-load risks are minimal, but external guides remain recommended for heavy loads.
When replacing an ISO 15552 cylinder, match these exact parameters: 63 mm bore, 130 mm stroke, 10 mm adjustment, PT ports, and the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this adjustable series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10 FAQ
At 0.7 MPa operating pressure, this 63 mm bore cylinder provides 2182 N of push force and 1402 N of pull force. The maximum push force is 2805 N at 0.9 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 130 mm nominal stroke down to 120 mm. This end-position tuning occurs at commissioning without needing live air to hold the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX130-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.