Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S
The AirTAC Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 375mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke375 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S
The AirTAC SAIJ63X375-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 365-375 mm usable travel window, letting you dial back the nominal 375 mm stroke by up to 10 mm during commissioning. The 63 mm bore delivers 1559 N of pull force at 0.5 MPa, making it well-suited for moderate-load positioning tasks.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and includes a magnet (-S) for use with AirTAC CMSE reed and DMSE solid-state sensors. The extruded aluminum barrel houses sensor grooves on both sides, and the standard PT tapered port threads match the G3/8 interface for this bore size.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S Technical Specifications
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S Is Used
Machine Changeover
Fine-tune the retract end-stop within the 365-375 mm window during product size changes without physically replacing the cylinder.
Assembly Positioning
Dial in the exact end-of-stroke position during machine commissioning to guarantee precise placement of moderate-force components.
Automated End-Stops
Replace fixed mechanical stops with an adjustable retract stopper to adapt production line tooling quickly and safely.
Is the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S the Right Cylinder?
Choose this adjustable-stroke model when your machine setup requires precise end-position tuning without adding external stops or swapping cylinders. If your application needs less force, the 50 mm bore offers 825 N of pull at 0.5 MPa; for heavier loads, the 80 mm bore provides 2268 N. The rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure—for secure load-holding, consider the SAIL or BSAI series. Because the stroke is 375 mm, ensure adequate external guidance to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S FAQ
The rear adjuster allows you to shorten the effective stroke by up to 10 mm, providing a usable travel window of 365-375 mm from the nominal 375 mm stroke. It functions as a physical stop and does not lock the load without air pressure.
At 0.5 MPa, the SAIJ63X375-10-S delivers 1559 N of pull force and 2182 N of push force at 0.7 MPa. It operates at speeds of 30-800 mm/s and is dimensionally interchangeable per ISO 15552.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.