Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30
The AirTAC Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 375mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke375 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30
The AirTAC SAIJ63X375-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 30 mm. This creates a specific 345-375 mm usable stroke window, letting you fine-tune the retract end position at commissioning without adding external stops. It delivers 1559 N of pull force at 0.5 MPa and 2182 N at 0.7 MPa.
This unit is configured with an SUS420J2 stainless steel rod for enhanced durability against moisture and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for dead-end holding, consider the SAIL or BSAI series.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30 Technical Specifications
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30 Is Used
Machine Changeover
Dial in the exact 345-375 mm retract position when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
End-Stop Tuning
Fine-tune the final resting position of a press or lift during commissioning to achieve precise alignment without external mechanical stops.
Variable Diverter Stroke
Adjust the travel distance of a sorting diverter arm on the fly to accommodate different package widths moving through the conveyor system.
Is the Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30 the Right Cylinder?
Choose this 63 mm bore when you need higher force than the 50 mm bore (which provides 825 N pull at 0.5 MPa) but want to avoid the larger footprint of the 80 mm option. The adjustable stroke is ideal for machine setups requiring variable end-stops during product changeovers. When matching an ISO 15552 replacement, verify the 375 mm stroke, 30 mm adjustment, PT G3/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 375 mm stroke is relatively long, an external guide rail is recommended to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30 FAQ
At 0.5 MPa operating pressure, it provides 1559 N of pull force and 1402 N of push force. At 0.7 MPa, the pull force increases to 2182 N.
The rear adjuster screw lets you shorten the nominal 375 mm stroke by up to 30 mm, providing a usable travel window of 345-375 mm. It acts as a stop to set the position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63AX375-30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.