
The AirTAC SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X350-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 350mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ63X350-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling precise end-position tuning without adding external stops. With a nominal 350 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 340-350 mm.
This variant includes a standard carbon steel piston rod and a magnetic piston (-S) for position sensing via CMSE reed or DMSE electronic switches. It features PT tapered port threads and uses the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR options. The rear adjuster acts purely as a travel stop for deceleration and does not hold the load without live air pressure.
| Model | Airtac SAIJ63 Adjustable Stroke Air Cylinder SAIJ63X350-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 340-350 mm retract end-stop during initial setup to perfectly align a multi-stage assembly process without machining new hard stops.
Quickly adjust the retract depth by up to 10 mm when switching between product sizes on a packaging line, minimizing downtime between production runs.
Select this 63 mm bore cylinder when your application requires 1559 N pull force at 0.5 MPa and a specific 340-350 mm travel window that fixed-stroke SAI models cannot easily provide. The 10 mm adjustment screw is ideal for fine-tuning the retract position during machine commissioning or product changeover. If your setup needs higher force, stepping up to the 80 mm bore yields 2268 N of pull force at 0.5 MPa. Because the stroke is 350 mm, the M16x1.5 rod should be guided externally to prevent excessive side-loading on the barrel seals. For applications requiring true load-holding without continuous air pressure, consider the SAIL or BSAI locking cylinder series instead of relying on this adjuster.
Quick checklist
At 0.7 MPa, the push force increases to 2182 N.
The rear adjuster screw allows you to trim the effective travel back by up to 10 mm from the 350 mm nominal stroke, creating a 340-350 mm usable window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.