Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX130-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 130mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke130 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10
The AirTAC SAIJ80X130-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 120 to 130 mm, allowing you to dial back the nominal 130 mm stroke by up to 10 mm.
This variant uses a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster acts purely as a mechanical stop to fine-tune the end position without adding external stops.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10 Is Used
End-Position Tuning
Dial in the exact retract distance within a 120-130 mm window during machine commissioning without installing external mechanical stops.
Product Changeover
Quickly adapt the stroke end point on a packaging line when product sizes change, using the rear screw to trim up to 10 mm of travel.
Corrosive Assembly
Leverage the SUS304 stainless steel rod for pushing or clamping tasks in environments where standard carbon steel rods would degrade.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10 the Right Cylinder?
The 10 mm adjustable window is perfect for product changeovers, letting you fine-tune the retract end position at commissioning without swapping cylinders. For load-holding without live air pressure, note that this adjuster is a stop, not a lock; consider SAIL or BSAI series cylinders instead.
To match this ISO 15552 interchangeable cylinder, specify an 80 mm bore, 130 mm stroke, 10 mm adjustment, PT G3/8 ports, and mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the stroke is under 300 mm, side-load stress is moderate, but always guide the load if it is heavy or offset.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10 FAQ
At 0.9 MPa, the push force increases to 4523 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from the nominal 130 mm down to 120 mm. It is a travel stop for fine-tuning, not a lock, and it does not hold the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX130-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.