
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX950-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X950-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits up to 50 mm of travel reduction. This yields a usable working window of 900-950 mm, allowing you to dial in the exact retract position at commissioning without adding external stopper blocks.
Because the 950 mm stroke is long, the 25 mm rod diameter and M20x1.5 rod thread provide substantial rigidity, though an external guide rail is still recommended to manage side loads over this extended travel. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches, and the mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX950-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance from 900 to 950 mm on a packaging line to accurately divert boxes of varying widths without changing out the entire actuator assembly.
Dial in the exact end-of-stroke position during initial machine setup to compensate for mechanical tolerance stack-up, ensuring precise alignment without external shims.
The adjustable 900-950 mm stroke is ideal for machinery that processes varying product lengths, letting operators fine-tune the end position during changeovers rather than physically swapping the cylinder for a fixed-stroke SAI model.
For any stroke of 950 mm, ensuring proper structural support is critical; always pair this cylinder with an external linear guide to prevent rod binding. Remember that the rear adjuster functions strictly as a travel stop and cannot hold a load without live air pressure—if load-holding is required for safety, explore the SAIL pneumatic lock or BSAI clamp-lock series instead. This unit is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
It can deliver a maximum thrust of 513 kgf at 1.0 MPa.
A rear-mounted adjusting screw acts as a mechanical stopper, allowing you to shorten the nominal 950 mm stroke by up to 50 mm. This creates a usable travel window between 900 and 950 mm, which can be fine-tuned during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.