
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X75-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 55 to 75 mm, allowing you to dial back the nominal 75 mm stroke by up to 20 mm during machine commissioning.
This -S variant includes a standard magnet for CMSE reed and DMSE electronic sensors. It uses a carbon steel rod with an M20x1.5 thread, paired with PT tapered port threads. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting set omits FB, CA, CB, and CR brackets, utilizing Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 55-75 mm window during machine setup to perfect product spacing without adding mechanical shims.
Quickly adapt the stroke stop on packaging lines when switching to different package sizes, using the rear screw to set new endpoints.
The adjustable stroke is perfect for product changeovers, letting you fine-tune the retract end position without swapping cylinders. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 75 mm nominal stroke, 20 mm adjustment range, PT G3/8 port, and -S magnet. The M20x1.5 rod thread handles high side loads well, but even at 75 mm stroke, always verify guiding if heavy lateral loads are present.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm. This creates a usable travel window of 55 to 75 mm, letting you fine-tune the end position at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.