Airtac SAUD Double Rod Cylinder SAUD32X195S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X195S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 195mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke195 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SAUD Double Rod Cylinder SAUD32X195S
The AirTAC SAUD32X195S is a double-acting, double-rod profile cylinder. A rod exits both ends, so the push and pull forces are identical at 345 N each way at 0.5 MPa. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same 32 mm bore. It has a 1/8 inch port and adjustable air cushions at both ends.
This unit includes the -S magnet option for CMSG, DMSG or EMSG switches. A practical safe working load is about 207 N, which translates to a vertical lift capacity of roughly 18 kg with a 2:1 safety margin. For high-temperature environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD32X195S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X195S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X195S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X195S Is Used
Twin Tool Transfer
Drives two synchronized work heads from one piston, keeping cycle times identical without adding a second valve.
Rear Cam Sensing
Uses the back rod extension to trip a CMSG or DMSG switch, freeing the front rod entirely for the primary work tool.
Anti-Rotation Pick Place
Prevents mechanical twist during vertical part gripping, ensuring the gripper stays perfectly aligned on descent.
Is the Airtac SAUD Double Rod Cylinder SAUD32X195S the Right Cylinder?
Choose this 32 mm bore (345 N equal force) when you need anti-rotation guidance or twin tooling. If you need more thrust, the 40 mm bore provides 528 N; if less is acceptable, there is no smaller standard SAUD size. Mounting is limited to Basic, FA flange and LB foot styles, matching the AirTAC SC series. The -S suffix enables electronic or reed sensing on the rear rod. At 195 mm stroke the side load is moderate, but always use external guide rails for heavy off-center loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X195S FAQ
Because it is a double-rod cylinder, the force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. It uses a 1/8 inch port.
No, the air cushions only decelerate the piston near the end of stroke and do not act as a brake. For load holding on air loss, you must fit an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.