Airtac SAUD Double Rod Cylinder SAUD32X200
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X200 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SAUD Double Rod Cylinder SAUD32X200
The AirTAC SAUD32X200 is a double-acting, double-rod profile cylinder. A 12 mm rod exits both ends of the hard-anodized aluminum extruded barrel, meaning both faces use the rod-side area. This yields an identical output of 345 N each way at 0.5 MPa. The extruded profile body is notably shorter than an ISO 15552 unit of the same 32 mm bore.
Because the rod protrudes at the back, you can mount a sensor cam or drive twin tooling with excellent anti-rotation guidance. This non-magnet SKU cannot host a magnetic switch. At 0.5 MPa, the computed safe working load is roughly 207 N, translating to a vertical lift capacity of about 18 kg with a 2:1 safety margin. The 1/8 inch port and M10x1.25 rod thread are fixed by the bore.
Airtac SAUD Double Rod Cylinder SAUD32X200 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X200 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X200
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X200 Is Used
Twin-Tool Transfer
Drives two synchronized pick-and-place heads from one compact body, ensuring both grips engage simultaneously without twist.
Balanced Vertical Lift
Lifts approximately 18 kg loads vertically with a 2:1 safety margin, using equal force on both up and down strokes.
Cam-Triggered Gauging
Uses the rear rod extension to trip a mechanical limit switch for position confirmation without internal magnets.
Is the Airtac SAUD Double Rod Cylinder SAUD32X200 the Right Cylinder?
Select this 32 mm bore if you need 345 N of equal bidirectional force at 0.5 MPa. Stepping up to the 40 mm bore raises that equal force to 528 N, while dropping below 32 mm is not standard in this series. A double rod is the right call for synchronized motion, anti-twist guidance, or carrying a cam on the rear extension. Mounting is limited to Basic, FA flange, and LB foot types, matching the AirTAC SC series. For the 200 mm stroke, ensure external guide rails carry any lateral load to prevent binding. Add the -S suffix variant if your application requires magnetic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X200 FAQ
The force is equal in both directions because the 12 mm rod exits both ends. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8 inch port supplies air for these figures.
No. A plain SAUD cylinder drifts without live air, as the adjustable 21 mm cushions only decelerate near stroke end. For vertical load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.