Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B is a genuine double-acting profile-type cylinder with a Ø100mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B
The SAUF100X175S-10B is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One DC24V coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. This unit includes a piston magnet for CMSG/DMSG/EMSG switches.
At 0.5 MPa it delivers 3927 N push and 3681 N pull. Size within the 0.15-0.8 MPa valve window, as the cylinder body rates to 1.0 MPa but the valve limits the assembly. The 3/8 inch port yields a Cv of 1.68 and 4 cycles/s. Computed buyer insight: safe working load is roughly 2356 N (60% of the 0.5 MPa push), giving a 200 kg vertical lift capacity with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B Is Used
Decentralized Clamping Press
Ideal for a large press where each 100 mm bore clamp fires from one DC24V signal, skipping a central manifold and cutting tubing.
Heavy Diverter Gate
Shifts heavy packages on a conveyor line. The 4M310 valve handles the flow, and the 1/2 inch cylinder port vents quickly.
Independent Lifting Station
Lifts 200 kg platforms vertically. The built-in magnet allows CMSG sensors to confirm position without external hardware.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B the Right Choice?
Compare against the 80 mm bore (2513 N push at 0.5 MPa) or step up if you need more than the 3927 N available here at 0.5 MPa. Confirm the DC24V terminal entry and PT thread suit your control panel. The rod retracts when energised; reposition the valve to extend on signal. Because the 4M310 routes air, it is not a lock—add an external rod lock or pilot-operated check valve to hold a load. Keep pressure within 0.15-0.8 MPa. For this 175 mm stroke, side-load is low, but always guide the rod for stability.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B FAQ
It pushes 3927 N and pulls 3681 N at 0.5 MPa, reaching 6282 N at 0.8 MPa. The built-in 4M310-10 valve has a 3/8 inch port, Cv 1.68, and runs on DC24V. Size force within the 0.15-0.8 MPa valve window, not the 1.0 MPa cylinder body rating.
The rod retracts when the coil energises; flip the valve to extend instead. The 5/2 valve routes air but does not lock the piston. If air drops, the load drifts. Use an external rod lock or pilot-operated check valve for holding.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X175S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.