Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 200mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke200 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A
The SAUF100X200S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One AC220V coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot in large machines. The extruded aluminum barrel makes it shorter than an ISO 15552 unit of the same bore.
It delivers 3927 N push and 3681 N pull at 0.5 MPa. A practical safe working load is roughly 2356 N, and it can vertically lift about 200 kg with a 2:1 margin. The integrated valve has a 3/8" port, Cv 1.68, and cycles up to 4 times per second. The cylinder body rates to 1.0 MPa, but you must size force within the valve's 0.15-0.8 MPa operating window. This unit includes a piston magnet for switches and uses a 1/2" cylinder port with an M20x1.5 rod thread.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×200 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A Is Used
Heavy-Duty Press Stand
Decentralized pressing station using one coil signal per actuator, avoiding long tubing runs from a central manifold.
Pallet Diverter Gate
Self-switching diverter on a high-speed conveyor, saving a valve manifold slot while providing 3927 N of push force.
Vertical Lift Station
Lifting heavy totes with a safe working load around 2356 N, using the built-in magnet for position feedback.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A the Right Choice?
When sizing, compare both ways: the 100 mm bore gives 3927 N push at 0.5 MPa, while the smaller 80 mm bore gives 2513 N. This 200 mm stroke is well above the 75 mm minimum and below the 1500 mm maximum, so standard. The AC220V coil uses terminal entry with PT threads. By default the rod retracts when energized, but you can reposition the valve to extend on signal. Because the 4M310 valve routes air, it is not a load lock; add an external rod lock or pilot-operated check valve to hold a load. For any stroke at or over 300 mm, use a guide to prevent side-load wear. The assembled unit is limited to 0.15-0.8 MPa despite the 1.0 MPa cylinder rating.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A FAQ
It pushes 3927 N and pulls 3681 N at 0.5 MPa, reaching 6282 N at 0.8 MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68) running on AC220V. Although the cylinder body rates to 1.0 MPa, the assembled unit must operate within the valve's 0.15-0.8 MPa window.
No, the 5/2 valve only routes air and is not a lock. The rod retracts by default when energized but can be reconfigured to extend. To hold a load on air loss, install an external rod lock or pilot-operated check valve.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X200S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.