Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-08
- Valve port1/4"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A
The SAUF100X600-08A is a double-acting profile cylinder with a built-in AirTAC 4M310-08 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. This 100mm bore unit pushes 3927N at 0.5MPa.
The integrated valve handles 1/4" ports with a Cv of 1.4 and cycles up to 4 times per second. It operates within a 0.15-0.8 MPa window, even though the cylinder body rates to 1.0 MPa. Based on the 0.5MPa push force, the safe working load is roughly 2356N, allowing a vertical lift of about 200kg with a 2:1 margin. This terminal-entry AC220V SKU lacks a magnet (-S), so it cannot accept a magnetic switch.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-08 (5/2) |
|---|---|
| Valve flow | 25.0 mm² (Cv 1.40) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M310-08. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A Is Used
Heavy Stamp Press Ejection
Uses the 6282N push at 0.8MPa to eject heavy metal blanks from a press die, driven by a single AC220V signal without a remote manifold.
Pallet Diverting Gate
Actuates a 600mm diverting arm on a high-speed packaging line, relying on the 4M310 valve's 4 cycles/sec for rapid sorting.
Decentralized Lift Station
Lifts 200kg loads vertically in an automated storage system, saving installation time by integrating the valve directly on the cap.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A the Right Choice?
When sizing, compare neighboring bores: the 80mm bore offers 2513N push at 0.5MPa, while this 100mm bore delivers 3927N. Always size force within the 0.15-0.8 MPa valve range, never the 1.0MPa cylinder rating. Confirm the AC220V terminal entry and PT thread meet your control specs. The default action retracts the rod when energized; you can reposition the valve to extend on energization. Because the valve only routes air, add an external rod lock or pilot-operated check valve for load holding. For this 600mm stroke, use external guides to prevent rod bending and side-load damage.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A FAQ
It provides 3927N push and 3681N pull at 0.5MPa, reaching 6282N push at 0.8MPa. The built-in 4M310-08 valve has a 1/4" port, Cv 1.4, and runs on AC220V. You must size the force within the valve's 0.15-0.8 MPa operating window, not the 1.0MPa cylinder body rating. The cylinder itself uses a 1/2" port.
The built-in valve routes air and is not a load lock, so the piston drifts on air loss. Add an external rod lock or pilot-operated check valve for holding. By default, the rod retracts when the coil is energized, but you can reposition the valve to extend on energization.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-08A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.