Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A
The SAUF100X600-10A is a double-acting profile cylinder with a built-in AirTAC 4M310-10 5/2 solenoid valve on the cap. One AC220V coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. It features a 1/2" cylinder port, M20x1.5 rod thread, and 29mm adjustable cushions.
Operating within the valve's 0.15-0.8 MPa window, this 100mm bore generates 3927N push and 3681N pull at 0.5 MPa. The integrated 4M310 valve provides a 3/8" port, Cv 1.68 flow, and 4 cycles/sec. For sizing, the safe working load is roughly 2356N (60% of the 0.5MPa push), and it can vertically lift about 200kg with a 2:1 margin. Note this SKU lacks a magnet (-S) and cannot take a sensor.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A Is Used
Decentralized Press Clamps
Ideal for large presses needing individual clamp control without running long tubing back to a central manifold.
Heavy Material Diverters
Provides robust 3927N push force for diverting heavy pallets directly at the conveyor lane.
Automated Pallet Stops
Delivers one-signal actuation for heavy-duty 100mm bore stopping gates in high-flow logistics.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A the Right Choice?
Size by comparing neighbors: the 80mm bore yields 2513N push at 0.5MPa, while this 100mm bore provides 3927N. Confirm the AC220V terminal entry and PT threads match your supply. The default action retracts the rod when energized, but you can reposition the valve to extend on signal. Always size force within the 0.15-0.8 MPa valve range, not the 1.0 MPa cylinder body rating. The valve only routes air; it is not a lock, so add an external rod lock or pilot-operated check valve to hold loads. For the 600mm stroke, use external guides to prevent rod bending and side-load wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A FAQ
It pushes 3927N and pulls 3681N at 0.5MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68, 4 cycles/sec) with an AC220V terminal entry coil. Although the cylinder body rates to 1.0MPa, the assembled unit must operate in the 0.15-0.8MPa valve window.
No. The built-in valve routes air but is not a load lock; the piston drifts on air loss and the 29mm cushion only decelerates near stroke end. For vertical holding, add an external rod lock or pilot-operated check valve. Also, this non-magnet SKU cannot take a sensor.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.