Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B is a genuine double-acting profile-type cylinder with a Ø100mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B
The SAUF100X600S-10B is a double-acting profile cylinder with a built-in AirTAC 4M310-10 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. This 100mm bore version features a 1/2" cylinder port, a 3/8" valve port, and a piston magnet for CMSG/DMSG/EMSG switches.
Operating within the 0.15-0.8 MPa valve window, it delivers 3927 N push at 0.5 MPa. The safe working load is roughly 2356 N, allowing a vertical lift of about 200 kg with a 2:1 margin. The integrated valve provides a 30 mm2 flow (Cv 1.68) and handles up to 4 cycles per second. It uses a DC24V terminal coil rated IP65, and pairs with Ø10xØ6.5 PU tube.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B Is Used
Heavy Material Lifts
Decentralized lifting of heavy platens on large machines, using the built-in valve to eliminate long tubing runs from a central manifold.
Pallet Diverters
Independent actuation of diverter arms on a conveyor line, where one coil signal per cylinder simplifies wiring and control.
Automated Storage Gates
Switching heavy routing gates in automated storage systems, saving manifold slots while providing high push force.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B the Right Choice?
Size this 100mm bore against the 80mm option (2513 N push at 0.5 MPa) or the 63mm option (1559 N) based on your load. Confirm the DC24V terminal entry and PT thread meet your control specs. The default action retracts the rod when energised, but you can reposition the valve to extend on signal. Always size force within the 0.15-0.8 MPa valve range, not the 1.0 MPa cylinder body rating. The valve only routes air, so add an external rod lock or pilot-operated check valve to hold loads. For the 600mm stroke, use external guides to prevent rod bending and side-load wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B FAQ
It pushes 3927 N and pulls 3681 N at 0.5 MPa, reaching 6282 N at 0.8 MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68, 30 mm2 flow, max 4 cycles/s) with a DC24V terminal coil. Size force within the 0.15-0.8 MPa valve operating window, not the 1.0 MPa cylinder body rating.
The default action retracts the rod when energised. You can reconfigure it to extend on signal by repositioning the built-in valve. Because the valve only routes air, it is not a load lock; you must add an external rod lock or pilot-operated check valve to hold a load safely.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X600S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.