Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A
The SAUF100X700-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It uses a 1/2" cylinder port and an M20x1.5 rod thread.
Operating in the 0.15-0.8 MPa valve window, it delivers 3927 N push force at 0.5 MPa. The integrated valve features a 3/8" port, Cv 1.68 flow, and a 4 cycle/sec limit. For sizing, the safe working load is roughly 2356 N, translating to a 200 kg vertical lift with a 2:1 margin. This terminal-entry AC220V SKU lacks a magnet, so it cannot accept a sensor.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A Is Used
Heavy Stamping Press
Provides localized high-force actuation at 0.5 MPa without running long tubing back to a central manifold.
Pallet Diverter
Switches heavy pallets with a single AC220V signal, using the 4M310 valve to save manifold space.
Vertical Lift Gate
Lifts loads up to 200 kg with a 2:1 margin, relying on the integrated valve for decentralized control.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A the Right Choice?
Size by comparing neighboring bores: the 80mm bore yields 2513 N push at 0.5 MPa, while this 100mm bore yields 3927 N. Confirm your coil is AC220V with terminal entry. The default action retracts the rod when energized, but you can reposition the valve to extend on signal. Always size force within the 0.15-0.8 MPa valve range, never the 1.0 MPa cylinder body rating. The valve only routes air; it is not a lock, so add an external rod lock or pilot-operated check valve to hold loads. For the 700mm stroke, use external guides to prevent rod bending and side-load wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A FAQ
It generates 3927 N push at 0.5 MPa and 6282 N at 0.8 MPa. The built-in valve is a 4M310-10 with a 3/8" port and Cv 1.68. The coil is AC220V with terminal entry. Size all forces within the 0.15-0.8 MPa valve operating window.
No. Because this model code lacks the S suffix, it has no magnet and cannot accept a sensing switch. Additionally, the rod retracts when the coil is energized by default, but you can reposition the valve to extend on signal.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.