Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A is a genuine double-acting profile-type cylinder with a Ø100mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A
The SAUF100X700S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. This 100mm bore version delivers a push force of 3927N at 0.5MPa, scaling to 6282N at 0.8MPa.
The integrated valve has a 3/8 inch port, Cv 1.68, and a 4 cycle/sec limit. It runs at 0.15-0.8 MPa, which sets the working pressure window, even though the cylinder body rates to 1.0 MPa. The piston features a magnet for position sensing. For sizing, the safe working load is roughly 2356N, and it can vertically lift about 200kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A Is Used
Automated Press Clamping
Decentralized clamping on a large press. The built-in valve provides immediate local switching for high-force 100mm bore actuation without long tubing runs.
Heavy Pallet Diverter
Diverting heavy pallets on a packaging line. One coil signal per actuator simplifies control and eliminates the need for a massive central valve manifold.
Vertical Material Gate
Operating a 700mm stroke material gate. The integrated 4M310 valve handles the high flow required to move the load efficiently within the 0.8MPa window.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A the Right Choice?
Size by force: the 100mm bore gives 3927N push at 0.5MPa, while the 80mm neighbour gives 2513N. Check your load against the 2356N safe working load. The AC220V terminal entry coil operates on 0.15-0.8 MPa. The rod retracts when energised; reposition the valve to extend on signal. The valve routes air and does not lock the load. Add an external rod lock or pilot-operated check valve for holding. At 700mm stroke, use external guides to prevent rod bending and side loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A FAQ
It delivers 3927N push at 0.5MPa and 6282N at 0.8MPa. The built-in valve is a 4M310-10 (3/8 inch port, Cv 1.68, 4 cycles/sec max). The AC220V terminal entry coil runs the assembled unit at 0.15-0.8 MPa. The cylinder port is 1/2 inch.
No. The built-in 5/2 valve routes air but does not lock the piston. If air is lost, the load drifts. You must add an external rod lock or pilot-operated check valve for secure load holding.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X700S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.