Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B is a genuine double-acting profile-type cylinder with a Ø100mm bore, 80mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ100 mm
- Stroke80 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B
The AirTAC SAUF100X80S-10B is a double-acting profile cylinder with a built-in 4M 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. It features a piston magnet for CMSG/DMSG/EMSG switches.
The integrated 4M310-10 valve has a 3/8" port, Cv 1.68, and runs at 4 cycles/s. The cylinder body rates to 1.0 MPa, but the assembled unit operates within the 0.15-0.8 MPa valve window. At 0.5 MPa it pushes 3927 N and pulls 3681 N. A computed buyer insight: safe working load is roughly 2356 N, allowing a vertical lift of about 200 kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/2" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 100×80 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B Is Used
Machine Press Clamping
Decentralized clamping on a large press line. The built-in 4M310 valve fires one actuator directly, cutting tubing runs to a central manifold.
Heavy Diverter Gate
Switching heavy pallets on a conveyor. The 100mm bore provides 3927 N push at 0.5 MPa, and the compact profile saves frame space.
Automated Lift Station
Lifting totes in a sortation hub. One DC24V signal drives the lift, simplifying wiring while handling a 200kg vertical load safely.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B the Right Choice?
Size force between the 0.15-0.8 MPa valve limits, not the 1.0 MPa cylinder body rating. The 100mm bore gives 3927 N push at 0.5 MPa; if you need less force, the 80mm bore gives 2513 N. This 80mm stroke is above the 75mm SAUF minimum. The DC24V coil uses terminal entry. Default action retracts when energised; reposition the valve to extend on signal. The valve routes air and is not a load lock, so add an external rod lock or pilot-operated check valve to hold a load. Mounting uses AirTAC SC series accessories.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B FAQ
It pushes 3927 N and pulls 3681 N at 0.5 MPa, reaching 6282 N at 0.8 MPa. The built-in valve is a 4M310-10 with Cv 1.68 and a 3/8" port. The coil is DC24V with terminal entry. Size force within the 0.15-0.8 MPa valve operating window.
One coil signal retracts the rod by default. You can reposition the valve to extend when energised. Because the 4M310 valve is integrated on the cap, you save a remote valve and a manifold slot. The valve only routes air, so add an external rod lock to hold loads.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF100X80S-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.