Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B is a genuine double-acting profile-type cylinder with a Ø32mm bore, 80mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ32 mm
- Stroke80 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B
The AirTAC SAUF32X80S-06B is a double-acting profile cylinder with a built-in 4M210-06 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 unit of the same bore. The S suffix means a piston magnet is present for CMSG/DMSG/EMSG switches.
Operating within the 0.15-0.8 MPa valve window, this 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa. The 1/8" ported valve delivers 14 mm2 flow (Cv 0.78) at up to 5 cycles per second. The cylinder body rates to 1.0 MPa but the assembled unit is limited by the valve. Based on the 0.5 MPa push force, the safe working load is about 241 N, and it can vertically lift roughly 20 kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/8" |
| Rod thread | M10×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 32×80 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B Is Used
Decentralized Clamping
Ideal for a machining cell where each clamping station needs independent actuation without routing long tubes back to a central manifold.
Compact Sorting Divertor
Fits tight conveyor spaces to push small parts, using the integrated valve to switch itself locally without extra plumbing.
Modular Test Fixture
Provides self-contained actuation for a test rig, allowing the DC24V coil to trigger a single probe or gate directly at the station.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B the Right Choice?
Size force between the 32 mm bore and the 40 mm neighbour (628 N push at 0.5 MPa) within the 0.15-0.8 MPa valve range. The 80 mm stroke suits the 50 mm minimum for this bore. Confirm the DC24V terminal entry and PT thread meet your control specs. By default the rod retracts when the coil is energised; reposition the valve to extend on signal. The valve routes air and is not a lock, so add an external rod lock or pilot-operated check valve to hold a load. For this 80 mm stroke side-load is minimal, but for strokes over 300 mm add a guide to prevent rod bending.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B FAQ
It pushes 402 N and pulls 345 N at 0.5 MPa. The built-in valve is a 4M210-06 with 1/8" ports, 14 mm2 flow (Cv 0.78), and a DC24V terminal coil. Although the cylinder body rates to 1.0 MPa, the assembled unit must operate in the 0.15-0.8 MPa valve window.
The default action retracts the rod when energised. You can reconfigure it to extend when energised by repositioning the built-in valve. Because the valve only routes air, use an external rod lock or pilot-operated check valve if you need to hold a load.
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF32X80S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.