Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B is a genuine double-acting profile-type cylinder with a Ø40mm bore, 1000mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke1000 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B
The SAUF40X1000S-06B is a double-acting profile cylinder with a built-in AirTAC 4M210 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. The S suffix indicates a piston magnet for CMSG/DMSG/EMSG switches.
Operating within the valve's 0.15-0.8 MPa window, this 40mm bore generates 628N push and 528N pull at 0.5 MPa. The 4M210-06 valve has a 1/8" port, 14mm2 flow (Cv 0.78), and cycles up to 5 times per second. Computed buyer insight: safe working load is roughly 377N (60% of the 0.5MPa push force), supporting a vertical lift of about 32kg with a 2:1 margin. The cylinder port is 1/4".
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/4" |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 40×1000 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B Is Used
Decentralized Conveyor Divert
Mounts directly at the divert station. One DC24V signal actuates the gate without routing air lines back to a central manifold.
Long-Reach Pallet Stop
The 1000mm stroke handles deep pallet indexing. Ensure external linear guides support the rod over this extended travel.
Packaging Machine Pusher
Self-switching actuation simplifies machine wiring. The 4M210-06 valve cycles up to 5 times per second for fast carton pushing.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B the Right Choice?
Size force within the 0.15-0.8 MPa valve range, not the 1.0 MPa cylinder body rating. This 40mm bore pushes 628N at 0.5 MPa; dropping to 32mm yields 402N, while stepping up to 50mm provides 982N. Confirm the DC24V terminal entry and PT threads. Default action retracts the rod when energised; reposition the valve to extend on energisation. The built-in valve routes air and is not a load lock—add an external rod lock or pilot-operated check valve to hold loads. For the 1000mm stroke, use external guides to prevent rod bending and side loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B FAQ
It pushes 628N and pulls 528N at 0.5 MPa. The built-in valve is a 4M210-06 (1/8" port, Cv 0.78, 5 cycles/sec max) with a DC24V coil. Size forces within the 0.15-0.8 MPa valve operating window, as the assembled unit cannot use the cylinder body's 1.0 MPa maximum.
No. The built-in 5/2 valve routes air but does not lock the piston. If air is lost, the rod drifts. Install an external rod lock or pilot-operated check valve for load holding. The default action retracts the rod when energised, but you can reposition the valve to extend on energisation.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X1000S-06B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.