Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A is a genuine double-acting profile-type cylinder with a Ø40mm bore, 225mm stroke and a built-in 4M210-08 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke225 mm
- Built-in valve4M210-08
- Valve port1/4"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A
The SAUF40X225S-08A is a double-acting profile cylinder with a built-in AirTAC 4M210-08 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than an ISO 15552 unit of the same bore. The bore dictates a 1/4" cylinder port, while the valve port is 1/4" with a 16 mm2 flow (Cv 0.89). The -S suffix means a piston magnet is present for CMSG/DMSG/EMSG switches.
Operating within the 0.15-0.8 MPa valve window, it delivers 628 N push and 528 N pull at 0.5 MPa. The safe working load is roughly 377 N (about 60% of the 0.5 MPa push force), translating to a 32 kg vertical lift with a 2:1 margin. The AC220V terminal entry coil is IP65 rated and allows up to 5 cycles per second. Remember the cylinder body rates to 1.0 MPa, but the assembled unit is limited by the valve to 0.8 MPa.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/4" |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-08 (5/2) |
|---|---|
| Valve flow | 16.0 mm² (Cv 0.89) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 40×225 | Bore × stroke in mm. |
| -08 | Valve port 1/4" → 4M210-08. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A Is Used
Decentralized Clamping
Ideal for a machining cell where each clamping station uses one coil signal to actuate independently, saving manifold space.
Inline Divert Gate
A single signal drives the divert gate directly at the conveyor, cutting tubing runs and simplifying installation.
Package Stopper Arm
Perfect for a packaging line stopper arm that cycles up to 5 times per second without needing a remote valve bank.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A the Right Choice?
Size by comparing neighbor bores: the 32 mm bore gives 402 N push at 0.5 MPa, while the 50 mm bore gives 982 N. This 40 mm bore provides 628 N push at 0.5 MPa. Confirm the AC220V terminal entry coil matches your supply. The rod retracts when the coil is energised; reposition the valve to extend on energisation. Always size force within the 0.15-0.8 MPa valve range, never the 1.0 MPa cylinder body rating. The built-in valve routes air and is not a lock—add an external rod lock or pilot-operated check valve to hold a load. For this 225 mm stroke, ensure adequate side-load guidance.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A FAQ
It delivers 628 N push and 528 N pull at 0.5 MPa. The built-in valve is a 4M210-08 (1/4" port, Cv 0.89, 5 cycles/s) with an AC220V terminal entry coil. The cylinder body rates to 1.0 MPa, but the assembled unit must operate in the 0.15-0.8 MPa valve window.
By default the rod retracts when the coil is energised. You can reconfigure it to extend when energised simply by repositioning the built-in valve. This self-switching design means no remote valve is needed.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X225S-08A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.