Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A is a genuine double-acting profile-type cylinder with a Ø40mm bore, 300mm stroke and a built-in 4M210-06 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ40 mm
- Stroke300 mm
- Built-in valve4M210-06
- Valve port1/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A
The SAUF40X300S-06A is a double-acting profile cylinder with a built-in AirTAC 4M 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. This model includes a piston magnet for CMSG/DMSG/EMSG switches.
It uses a 4M210-06 valve with a 1/8" port, 14 mm2 flow (Cv 0.78), and a 5 cycle/s limit. The coil is AC220V with terminal entry. The cylinder body rates to 1.0 MPa, but the assembled unit operates at 0.15-0.8 MPa. At 0.5 MPa it pushes 628 N and pulls 528 N. A safe working load is roughly 377 N, allowing a vertical lift of about 32 kg with a 2:1 margin.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø40 mm |
| Stroke | 300 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 1/4" |
| Rod thread | M12×1.25 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M210-06 (5/2) |
|---|---|
| Valve flow | 14.0 mm² (Cv 0.78) |
| Max frequency | 5 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 40×300 | Bore × stroke in mm. |
| -06 | Valve port 1/8" → 4M210-06. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A Is Used
Diverter Gate Actuation
Uses one coil signal per lane to push sorting flaps directly on the conveyor frame, cutting tubing runs to a central manifold.
Decentralized Pallet Stop
Mounts independently on roller conveyors to raise and lower pallet stops without dedicating a valve island slot to each station.
Independent Clamp Station
Provides self-contained clamping on multi-station fixtures where routing air lines from a main valve bank is impractical.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A the Right Choice?
Size this 40 mm bore against the neighbouring 32 mm (402 N push) and 50 mm (982 N push) options at 0.5 MPa. Confirm the AC220V terminal entry meets your control voltage. The rod retracts by default when energised; reposition the valve to switch to extend-when-energised. Always size force within the 0.15-0.8 MPa valve window, never the 1.0 MPa cylinder body rating. The built-in valve routes air and is not a lock; add an external rod lock or pilot-operated check valve to hold a load. For the 300 mm stroke, use an external guide to prevent rod bending and side-load wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A FAQ
It pushes 628 N and pulls 528 N at 0.5 MPa. The built-in valve is a 4M210-06 with a 1/8" port and Cv 0.78. The coil is AC220V. Although the cylinder body rates to 1.0 MPa, the assembled unit must operate in the 0.15-0.8 MPa valve window.
By default the rod retracts when the coil is energised, but you can reposition the valve to extend-when-energised. The valve only routes air; it is not a load lock. The piston will drift on air loss, so add an external rod lock or pilot-operated check valve for load holding.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF40X300S-06A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.