Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B is a genuine double-acting profile-type cylinder with a Ø63mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B
The SAUF63X600-10B is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, saving a manifold slot and tubing for decentralized setups. The extruded aluminum barrel is shorter than an ISO 15552 unit of the same bore. This 63mm bore pushes 1559N at 0.5MPa, with a 3/8" air port and M16x1.5 rod thread.
The integrated valve handles 3/8" ports with a 30mm2 flow (Cv 1.68) and cycles up to 4 times per second. It runs on DC24V via terminal entry. The cylinder body rates to 1.0MPa, but size force strictly within the valve's 0.15-0.8MPa window. Based on the 0.5MPa push force, expect a safe working load around 935N, or a vertical lift capacity of roughly 79kg with a 2:1 margin. This SKU lacks the S magnet, so it cannot accept a magnetic switch.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B Is Used
Divert Gate Actuation
Drives a decentralized lane diverter directly at the conveyor, eliminating long tubing runs back to a central manifold.
Packaging Pusher
Pushes cartons off a packing line using one DC24V signal, saving a manifold slot while delivering 1559N push force.
Machine Guard Gate
Opens and closes a 600mm stroke access door with integrated speed and cushion control at the actuator itself.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B the Right Choice?
When sizing, compare neighbouring bores: the 50mm bore yields 982N push while the 80mm bore yields 2513N at 0.5MPa. This 63mm unit provides 1559N push and 1402N pull at 0.5MPa. Always size within the 0.15-0.8MPa valve operating range, never the 1.0MPa cylinder body rating. Verify your coil is DC24V with terminal entry. The rod retracts by default when energized, but you can reposition the valve to extend on signal. Because this is a 600mm stroke, add external guides to prevent rod bending and side-load damage. The built-in valve only routes air; it is not a lock. For load holding on air loss, add an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B FAQ
It delivers 1559N push and 1402N pull at 0.5MPa, reaching 2494N push at the 0.8MPa maximum. The built-in valve is a 4M310-10 (5/2 solenoid) with a 3/8" port, 30mm2 flow (Cv 1.68), and a 4 cycle/s limit. It operates on DC24V. You must size force within the valve's 0.15-0.8MPa working range, not the 1.0MPa cylinder body rating.
No. The built-in valve routes air but is not a load lock; the piston will drift on air loss and the 21mm cushion only decelerates near stroke end. Add an external rod lock or pilot-operated check valve for holding. Also, this specific SKU lacks the S magnet, so it cannot accept a magnetic switch.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.