Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A is a genuine double-acting profile-type cylinder with a Ø63mm bore, 600mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke600 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A
The SAUF63X600S-10A is a double-acting profile cylinder with a built-in AirTAC 4M310-10 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The 63 mm bore features a 3/8 inch air port, a 20 mm rod, and M16x1.5 rod-end thread. The integrated valve has a 3/8 inch port, Cv 1.68 flow, and handles up to 4 cycles per second.
Size force within the 0.15-0.8 MPa valve operating window, even though the cylinder body rates to 1.0 MPa. At 0.5 MPa it delivers 1559 N push and 1402 N pull. A practical computed insight: the safe working load is roughly 935 N, and it can vertically lift about 79 kg with a 2:1 margin. This S-suffix model includes a piston magnet for CMSG/DMSG/EMSG sensors.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×600 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A Is Used
Decentralized Conveyor Divert
Mounts directly at the divert gate to actuate sorting arms without running long tubing back to a central manifold.
Independent Machine Clamp
Provides localized clamping on a large fixture, switching itself via the built-in valve to reduce installation complexity.
Vertical Lift Gate
Drives an access gate with a single electrical signal, leveraging the 79 kg vertical lift capacity within the 0.8 MPa limit.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A the Right Choice?
When sizing, compare neighbouring bores: a 50 mm bore gives 982 N push while an 80 mm bore yields 2513 N at 0.5 MPa. This 63 mm unit provides 1559 N push, fitting between them. Confirm the AC220V terminal entry and PT threads before ordering. The default action retracts the rod when energised, but you can reposition the valve to extend on signal. Because the 600 mm stroke exceeds 300 mm, use an external guide to prevent rod bending and side-load wear. The assembled unit operates at 0.15-0.8 MPa. The valve only routes air; it is not a lock, so add an external rod lock or pilot-operated check valve to hold loads safely.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A FAQ
It generates 1559 N push at 0.5 MPa and 2494 N at 0.8 MPa. The built-in valve is a 4M310-10 5/2 solenoid with Cv 1.68, running on AC220V. The assembled unit must operate within the 0.15-0.8 MPa valve window, not the 1.0 MPa cylinder body rating.
Yes. The default action retracts the rod on signal, but you can reconfigure it to extend-when-energised by physically repositioning the built-in valve on the cap. This allows flexible machine sequencing without extra remote valves.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X600S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.