Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A is a genuine double-acting profile-type cylinder with a Ø63mm bore, 700mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ63 mm
- Stroke700 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A
The SAUF63X700-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. This 63mm bore uses a 3/8" air port and a 20mm rod with an M16x1.5 thread.
Operating in the 0.15-0.8 MPa valve window, it delivers 1559N push at 0.5 MPa. The 3/8" valve port gives a Cv of 1.68 and cycles up to 4 times per second. The safe working load is roughly 935N, allowing a vertical lift of about 79kg with a 2:1 margin. This terminal-entry AC220V SKU lacks a magnet, so it cannot accept a sensor.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M16×1.5 |
| PU tube | Ø8 × Ø5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 63×700 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A Is Used
Divert Gate Actuation
Drives a sorting diverter directly at the conveyor lane without routing long air lines back to a central manifold.
Decentralized Pallet Stop
Controls a pallet stop on a roller bed using one AC220V signal, freeing up valve island space for other machine functions.
Long-Reach Clamp Arm
Moves a clamping fixture 700mm out to a workpiece, relying on external guides to manage the side-load.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A the Right Choice?
Size against the 63mm bore force: 1559N push and 1402N pull at 0.5 MPa, scaling to 2494N push at the 0.8 MPa valve limit. If you need less force, drop to the 50mm bore (982N push); for more, step up to the 80mm bore (2513N push). Confirm the AC220V terminal entry and PT threads suit your control panel. The default action retracts the rod when energised, but you can reposition the valve to extend on signal. The cylinder body rates to 1.0 MPa, but size force within the 0.15-0.8 MPa valve range. The valve only routes air and is not a lock; add an external rod lock or pilot-operated check valve to hold a load. With a 700mm stroke, use external guides to prevent rod bending and side-load wear.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A FAQ
It generates 1559N push and 1402N pull at 0.5 MPa, reaching 2494N push at 0.8 MPa. The built-in valve is a 4M310-10 with a 3/8" port, Cv 1.68, and a 4 cycle/sec limit. It runs on an AC220V terminal-entry coil. Size the force within the 0.15-0.8 MPa valve operating window, not the 1.0 MPa cylinder body rating.
This specific SKU lacks a magnet, so it cannot accept a magnetic switch. The integrated 5/2 valve switches the actuator with one coil signal, defaulting to retract-when-energised. You can reposition the valve block to extend-when-energised if your logic requires it.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF63X700-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.