Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A is a genuine double-acting profile-type cylinder with a Ø80mm bore, 100mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke100 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A
The SAUF80X100-10A is a double-acting profile cylinder with a built-in AirTAC 4M310 5/2 solenoid valve mounted on the cap. One coil signal drives the actuator directly, eliminating remote plumbing and saving a manifold slot. The extruded aluminum barrel makes it shorter than a standard ISO cylinder of the same bore. It uses an M20x1.5 rod thread and a 3/8" cylinder port.
Operating strictly within the 0.15-0.8 MPa valve window, it delivers 2513 N push force at 0.5 MPa. A practical computed insight is a safe working load of roughly 1508 N, or a vertical lift capacity of about 128 kg with a 2:1 margin. The integrated 3/8" valve offers a 1.68 Cv flow rate at up to 4 cycles per second. This terminal-entry AC220V unit has no magnet and cannot accept a sensor.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 80×100 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A Is Used
Decentralized Clamping
Ideal for large machining cells where running a single AC220V signal to each clamping station saves tubing and manifold complexity.
Inline Diverters
Provides independent actuation for sorting gates on conveyor lines, utilizing the built-in 4M310 valve for rapid 4 cycle/sec response.
Package Stops
Perfect for localized package stopping mechanisms in distribution hubs, eliminating the need for a centralized remote valve bank.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A the Right Choice?
When sizing, compare this 80 mm bore against the 63 mm and 100 mm neighbors. At 0.5 MPa the 63 mm yields 1559 N push, while the 100 mm reaches 3927 N. This model provides 2513 N push at 0.5 MPa. Confirm the AC220V coil and terminal entry match your control system. Remember the assembled unit operates at 0.15-0.8 MPa, not the 1.0 MPa rating of the cylinder body. The valve routes air but does not function as a load lock; add an external rod lock or pilot-operated check valve for holding. Since the stroke is 100 mm, side-load guides are not critical, but always ensure proper mounting with SC-series accessories.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A FAQ
It delivers 2513 N push and 2268 N pull at 0.5 MPa, reaching 4021 N at 0.8 MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68, 30 mm2 flow). The coil is AC220V with terminal entry. You must size force within the 0.15-0.8 MPa valve operating window, not the 1.0 MPa cylinder body rating.
By default the rod retracts when the coil is energized, but you can reconfigure it to extend by repositioning the valve. The 5/2 valve only routes air; it is not a load lock. If air is lost, the piston drifts and the 28 mm cushion only decelerates near stroke end, so add an external rod lock for holding.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X100-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.