Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B is a genuine double-acting profile-type cylinder with a Ø80mm bore, 1000mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke1000 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilDC24V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B
The AirTAC SAUF80X1000-10B is a double-acting profile cylinder with a built-in 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot in decentralized setups. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. This SKU lacks a magnet (-S) and cannot take a magnetic switch.
Operating within the valve's 0.15-0.8 MPa window, it delivers 2513 N push at 0.5 MPa. The computed safe working load is roughly 1508 N, allowing a vertical lift of about 128 kg with a 2:1 margin. The integrated 4M310-10 valve has a 3/8" port, Cv 1.68 flow, and switches up to 4 cycles/s. The cylinder bore port is 3/8" PT, using a PU tube of Ø10xØ6.5.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | DC24V · DC 3.0 W |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 80×1000 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| B | Coil voltage DC24V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B Is Used
Decentralized Conveyor Divert
Mounts directly on the line for one-signal diverting. The built-in 4M310 valve eliminates long tube runs back to a central manifold.
Vertical Lift Gate
Lifts up to 128 kg with a 2:1 safety margin at 0.5 MPa. Ideal for localized warehouse gates needing independent control.
Long-Stroke Material Push
Pushes parts across a 1000 mm span. The integrated valve ensures rapid 4 cycle/s actuation right at the machine frame.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B the Right Choice?
Size between neighbours: bore 63 offers 1559 N push, while bore 100 provides 3927 N at 0.5 MPa. This 80 mm bore yields 2513 N push and 2268 N pull at 0.5 MPa, peaking at 4021 N at 0.8 MPa. Confirm the DC24V terminal entry and PT threads. The cylinder body rates to 1.0 MPa, but you must size force within the 0.15-0.8 MPa valve limit. Default action retracts the rod when energised; reposition the valve to extend-when-energised. The valve routes air and is not a load lock—add an external rod lock or pilot-operated check valve for holding. For this 1000 mm stroke, use external guides to prevent rod bending and side loads.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B FAQ
It generates 2513 N push at 0.5 MPa and 4021 N at 0.8 MPa. The built-in valve is a 4M310-10 with a 3/8" port and Cv 1.68. The DC24V coil runs at 3.0 W. Although the cylinder body rates to 1.0 MPa, the assembled unit must operate within the 0.15-0.8 MPa valve window.
No. The built-in valve routes air and is not a lock; the piston drifts on air loss. Add an external rod lock or pilot-operated check valve for holding. Additionally, this specific SKU lacks a magnet and cannot accept a magnetic switch.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X1000-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.