Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A
The AirTAC Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A is a genuine double-acting profile-type cylinder with a Ø80mm bore, 175mm stroke and a built-in 4M310-10 5/2 solenoid valve — it switches itself from one coil signal, so no separate remote valve or extra plumbing is needed.
- BoreØ80 mm
- Stroke175 mm
- Built-in valve4M310-10
- Valve port3/8"
- CoilAC220V
- EntryTerminal
About the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A
The SAUF80X175S-10A is an extruded aluminum profile-type double-acting cylinder with a built-in AirTAC 4M310 5/2 solenoid valve on the cap. One coil signal drives the actuator, eliminating remote plumbing and saving a manifold slot. The 80mm bore delivers 2513N push at 0.5MPa. The integrated valve runs 0.15-0.8MPa, so the 1.0MPa cylinder body rating is capped by the valve. This unit has a 3/8" valve port, Cv 1.68, and a 3/8" cylinder port.
The built-in 4M310-10 valve handles 4 cycles/sec and uses a terminal entry AC220V coil (IP65, response <=0.05s). A computed buyer insight: safe working load is ~1508N (60% of the 0.5MPa push), allowing a 128kg vertical lift with a 2:1 margin. The S suffix adds a piston magnet for CMSG/DMSG/EMSG switches. PU tube is Ø10xØ6.5.
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A Technical Specifications
| Model | Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A |
|---|---|
| Series | SAUF profile cylinder with valve |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, self-valved |
| Cylinder port | 3/8" |
| Rod thread | M20×1.5 |
| PU tube | Ø10 × Ø6.5 |
| Built-in valve | 4M310-10 (5/2) |
|---|---|
| Valve flow | 30.0 mm² (Cv 1.68) |
| Max frequency | 4 cycle/sec |
| Coil voltage | AC220V · AC 3.5 VA |
| Electrical entry | Terminal · IP65 · B class |
| Response time | 0.05 s and below |
| Operating pressure | 0.15 – 0.8 MPa (valve limit) |
| Speed range | 30 – 800 mm/s |
The cylinder rates to 1.0 MPa but the built-in valve operates 0.15–0.8 MPa, so run the assembled SAUF at 0.15–0.8 MPa. Default: rod retracts when the coil is energised (reconfigurable to extend). Specs follow the official AirTAC SAUF datasheet. Port options: PT / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
Sized within the valve's 0.15–0.8 MPa range. Actual usable force is lower than theoretical due to friction and back-pressure.
Model Code: Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A
| SAUF | Profile cylinder with built-in 4M valve. |
|---|---|
| 80×175 | Bore × stroke in mm. |
| -10 | Valve port 3/8" → 4M310-10. |
| A | Coil voltage AC220V. |
| I / (blank) | Terminal electrical entry. |
SAUF does not hold its load without air — the valve routes air, it is not a lock. For a held load, add an external rod lock or a pilot-operated check valve.
Where the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A Is Used
Decentralized Conveyor Divert
Mounts directly at the divert station. One AC220V signal actuates the 80mm pusher without routing air lines back to a central manifold.
Independent Pallet Stop
Ideal for standalone pallet stops where floor space is tight. The built-in 4M310 valve eliminates a separate valve island installation.
Machine Tool Clamp
Provides 2513N clamping force at 0.5MPa. The integrated magnet allows position confirmation via CMSG/DMSG/EMSG switches.
Is the Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A the Right Choice?
Size both ways: the 63mm neighbor pushes 1559N while the 100mm reaches 3927N at 0.5MPa, so this 80mm bore fits mid-range loads. Confirm the AC220V terminal entry and PT threads. Default action retracts the rod when energized, but repositioning the valve switches it to extend-when-energized. Always size force within the 0.15-0.8MPa valve window, never the 1.0MPa body rating. The valve routes air and is not a lock; for held loads add an external rod lock or pilot-operated check valve. For this 175mm stroke, side-load is low, but ensure guide alignment for longer travels.
Quick checklist
- ✓ Force at 0.15–0.8 MPa
- ✓ Coil voltage matches panel
- ✓ Terminal vs grommet entry
- ✓ Retract- or extend-when-energised
- ✓ Load-holding → external rod lock
Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A FAQ
It pushes 2513N and pulls 2268N at 0.5MPa, reaching 4021N at 0.8MPa. The built-in valve is a 4M310-10 (3/8" port, Cv 1.68, 4 cycles/sec) with an AC220V terminal entry coil. The cylinder body rates to 1.0MPa, but the assembled unit operates strictly at 0.15-0.8MPa.
By default the rod retracts when the coil is energized. You can reconfigure it to extend-when-energized simply by repositioning the built-in valve. Because the valve only routes air, it is not a load lock; add an external rod lock or pilot-operated check valve if you need to hold a load.
Related AirTAC Cylinders & Valves
Request a Quote for Airtac SAUF Series Valve-Mounted Air Cylinder SAUF80X175S-10A
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.