Airtac SC100 Standard Cylinder SC100X1500SCB
The AirTAC Airtac SC100 Standard Cylinder SC100X1500SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 1500mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1500 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1500SCB
The SC100X1500SCB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (up to 7068 N at 0.9 MPa). Its 1500 mm stroke reaches the maximum standard length for the 100 mm bore, making it a workhorse for long linear movements in material handling and heavy gate actuation.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and a rear double clevis (CB) for pivoting installation. The 25 mm piston rod and 29 mm adjustable air cushion provide robust deceleration, while the PT1/2 ports ensure high flow for fast cycle times.
Airtac SC100 Standard Cylinder SC100X1500SCB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1500SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1500SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1500SCB Is Used
Long-Stroke Pallet Transfer
Moves pallets across wide conveyor gaps with 3927 N of force at standard line pressure, supported by the full 1500 mm stroke.
Heavy Foundry Gate Actuation
Operates large sliding gates or dampers in dusty, high-temperature adjacent areas, using the rear clevis mount to accommodate structural misalignment.
Timber Mill Log Kick-off
Provides the 7068 N maximum push at 0.9 MPa to eject heavy logs from a processing line, with sensor feedback confirming full extension and retraction.
Is the Airtac SC100 Standard Cylinder SC100X1500SCB the Right Cylinder?
For higher thrust, step up to the 125 mm bore (6136 N at 0.5 MPa). If the application requires less force, the 80 mm bore provides 2513 N at 0.5 MPa. At a 1500 mm stroke, side loads are a critical concern—always use an external guide or rod support to prevent bending of the 25 mm rod. This cylinder is a direct replacement only for another AirTAC SC100 tie-rod cylinder matching the 1500 mm stroke, PT1/2 ports, -S magnet, and CB rear double clevis mount.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1500SCB FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X1500SCB is a double-acting cylinder and will drift or drop if pressure is lost or the directional valve is centered. To hold a position without live pressure, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1500SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.