Airtac SC100 Standard Cylinder SC100X152
The AirTAC Airtac SC100 Standard Cylinder SC100X152 is a genuine double-acting standard air cylinder with a Ø100mm bore and 152mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke152 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X152
The SC100X152 is a 100 mm bore, 152 mm stroke double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable deceleration for mid-range linear motion tasks.
Built on a durable tie-rod construction, this cylinder is shorter than an equivalent ISO 15552 profile, making it a space-efficient choice. The body length A is 188 mm, resulting in a total extended length of approximately 340 mm, ideal for installations where overall footprint is constrained.
Airtac SC100 Standard Cylinder SC100X152 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X152 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 152 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X152
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×152 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X152 Is Used
Material Reject Gates
Provides the 3927 N push force at 0.5 MPa needed to divert packages or parts on a conveyor line with a 152 mm stroke, handling robust actuation without slowing the line.
Clamping & Fixturing
Delivers strong, consistent clamping force for CNC machining or welding fixtures, with the 152 mm stroke offering ample clearance for part loading and unloading.
Press & Assembly Tools
Generates up to 7068 N of thrust at 0.9 MPa for light press-fit or forming operations, using the adjustable cushion to manage end-of-stroke impact at higher cycle rates.
Is the Airtac SC100 Standard Cylinder SC100X152 the Right Cylinder?
For higher force requirements, stepping up to the 125 mm bore provides 6136 N at 0.5 MPa. If a smaller footprint is needed, the 80 mm bore offers 2513 N. Ensure the 152 mm stroke is within your machine's envelope, and always align the rod axially with the load to prevent side-loading. To match this cylinder for a replacement, verify five points: 100 mm bore, 152 mm stroke, PT1/2 port thread, basic (no accessory) mounting, and no built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X152 FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall length than an ISO 15552 profile cylinder. It is a direct dimensional match only for another AirTAC SC series cylinder with the same 100 mm bore, 152 mm stroke, PT ports, and basic mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X152
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.