Airtac SC100 Standard Cylinder SC100X160
The AirTAC Airtac SC100 Standard Cylinder SC100X160 is a genuine double-acting standard air cylinder with a Ø100mm bore and 160mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke160 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X160
The SC100X160 is a robust double-acting pneumatic cylinder from the AirTAC SC tie-rod family, delivering a substantial 3927 N of push force when supplied with 0.5 MPa air pressure. With a 100 mm bore and a 160 mm standard stroke, it features a 25 mm diameter piston rod, an M20x1.5 rod thread, and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly.
This cylinder uses a PT1/2 port for air connections and operates reliably between -20 and +70 °C with its standard TPU seals. The body length A is 188 mm, giving a total extended length of approximately 348 mm. It is a genuine AirTAC component, ideal for industrial automation tasks requiring high force in a compact, repairable tie-rod design.
Airtac SC100 Standard Cylinder SC100X160 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X160 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X160
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X160 Is Used
Pallet Stop & Lift
The 3927 N push force at 0.5 MPa makes the SC100X160 a powerful choice for stopping or lifting heavy pallets on conveyor lines, providing reliable actuation for material routing.
Heavy-Duty Clamping
Apply firm, consistent clamping force for large workpieces in machining or welding fixtures. The rigid 25 mm rod resists deflection under high clamping loads.
Baler & Compactor Ejection
With a maximum theoretical force of 801 kgf, this cylinder can eject compacted materials from balers or form presses, handling the demanding push stroke required.
Is the Airtac SC100 Standard Cylinder SC100X160 the Right Cylinder?
Select the SC100 bore when your application needs around 3927 N of push force at standard plant pressure. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the SC125 bore offers 6136 N at the same pressure.
To ensure a correct replacement, match five key points: the 100 mm bore, the 160 mm stroke, the standard PT port thread, the basic mounting style (no included bracket), and the absence of a built-in magnet. The 160 mm stroke is well-supported by the standard rod bearing, but for strokes over 300 mm, always check for potential side loads that could bend the rod and consider adding an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X160 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is shorter in overall length than a comparable ISO 15552 profile cylinder. It is dimensionally interchangeable only with another AirTAC SC tie-rod cylinder of the same bore, stroke, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.