Airtac SC100 Standard Cylinder SC100X195TC
The AirTAC Airtac SC100 Standard Cylinder SC100X195TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 195mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke195 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X195TC
The AirTAC SC100X195TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. With a 100 mm bore and 195 mm stroke, it uses a 25 mm diameter piston rod and PT1/2 ports, making it a robust actuator for medium-to-heavy linear motion tasks.
This model is configured with a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot during operation. The total extended body length is approximately 383 mm (188 mm body length A + 195 mm stroke), and the adjustable air cushion decelerates the 29 mm cushion stroke to reduce end-of-travel impact.
Airtac SC100 Standard Cylinder SC100X195TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X195TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X195TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X195TC Is Used
Conveyor Diverter Gates
The 3927 N push force at 0.5 MPa and pivoting trunnion mount allow this cylinder to reliably actuate heavy diverter gates on material handling lines, handling frequent cycling with the 29 mm air cushion absorbing shock.
Clamping & Fixturing
Delivers up to 7068 N of clamping force at 0.9 MPa for holding large workpieces during machining or welding. The 195 mm stroke provides ample retraction to clear the part for loading and unloading.
Agricultural Equipment Actuation
Suitable for pivoting chutes or hopper doors on farm machinery. The TPU seals handle standard temperatures from -20 to +70 °C, and the tie-rod construction allows for easy field maintenance.
Is the Airtac SC100 Standard Cylinder SC100X195TC the Right Cylinder?
Choose the SC100X195TC when your application needs around 4000 N of force at standard plant pressure. If you can accept a smaller envelope, stepping down to an 80 mm bore (2513 N push at 0.5 MPa) saves space, while moving up to a 125 mm bore (6136 N push at 0.5 MPa) provides a significant force increase. The centre trunnion mount is ideal for applications where the cylinder body must pivot to follow an arc.
For a direct replacement, match five key points: 100 mm bore, 195 mm stroke, PT port thread, centre trunnion (TC) mounting with the TCM1 bracket, and the standard TPU seal. This SC model is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X195TC FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No, the AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. For a correct replacement, match the SC series specifically, ensuring the bore, stroke, PT port, and TC centre trunnion mount align.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X195TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.