Airtac SC100 Standard Cylinder SC100X200TC
The AirTAC Airtac SC100 Standard Cylinder SC100X200TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X200TC
The SC100X200TC is a double-acting pneumatic cylinder delivering a substantial 3927 N push force at 0.5 MPa (up to 7068 N at 0.9 MPa). Its 200 mm stroke is paired with a 25 mm diameter piston rod and a body length A of 188 mm, giving a compact yet powerful actuator for medium-duty linear tasks.
This model is configured with a TC centre trunnion mount (supplied with the TCM1 bracket, part F-SC100TC), allowing the cylinder to pivot during operation and absorb misalignment in swinging applications. The standard PT port thread is 1/2 inch, and the adjustable air cushion at each end decelerates the piston smoothly to reduce end-of-stroke impact.
Airtac SC100 Standard Cylinder SC100X200TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X200TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X200TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X200TC Is Used
Clamping & Fixturing
Generates 3927 N at 0.5 MPa for secure workpiece clamping in CNC machining centres and welding jigs, where the trunnion mount allows the cylinder to swing clear for part loading.
Part Diverter Gates
The centre trunnion pivot lets this cylinder actuate diverter arms on conveyor lines, smoothly redirecting packages or components between lanes with a 200 mm stroke sweep.
Press & Forming Assist
Delivers up to 7068 N at 0.9 MPa for light pressing, forming, or stamping operations, where the adjustable cushion protects tooling by softening the end-of-stroke impact.
Is the Airtac SC100 Standard Cylinder SC100X200TC the Right Cylinder?
Choose the SC100 when your application needs around 3927 N at 0.5 MPa; if you can work with roughly 2513 N, stepping down to an SC80 reduces weight and air consumption. For higher force demands near 6136 N, the SC125 is the next logical step up. This cylinder must be matched for replacement on five points: 100 mm bore, 200 mm stroke, PT port thread, TC centre trunnion mounting with TCM1 bracket, and no magnet.
At a 200 mm stroke, the rod's bending moment is moderate, but any side load must be managed. If the load is not perfectly guided along the rod axis, install an external guide rail or linear bearing to protect the rod bearing and seals from premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X200TC FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with matching stroke, PT ports, and TC centre trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X200TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.