Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500
The AirTAC Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500 is a genuine double-acting standard air cylinder with a Ø200mm bore and 1500mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ200 mm
- Stroke1500 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 33 mm
About the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500
The SC200X1500 is a heavy-duty double-acting tie-rod cylinder delivering 15708 N of push force at 0.5 MPa (28274 N at 0.9 MPa). With a 40 mm diameter piston rod and a 33 mm adjustable air cushion, it is built for large-scale industrial automation requiring extreme force over a long 1500 mm stroke.
This model features a body length A of 244 mm and PT3/4 ports. As a genuine AirTAC SC series cylinder, it provides reliable linear actuation for demanding applications where robust construction and consistent performance are critical.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500 Technical Specifications
| Model | Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500 |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø200 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (approx.) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500
| SC | Standard tie-rod cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500 Is Used
Heavy Press & Forming
Applies up to 28274 N of force at 0.9 MPa for stamping, pressing, and metal forming operations requiring a long 1500 mm working stroke.
Large-Scale Material Handling
Pushes or pulls heavy pallets and structural components on conveyor lines, leveraging the 15708 N push force at standard 0.5 MPa supply pressure.
Structural Testing Rigs
Provides controlled, high-force linear motion for load testing beams, welds, and large assemblies, with an adjustable cushion to protect the test article at stroke end.
Is the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500 the Right Cylinder?
Select the SC200 bore when your application requires between 15708 N and 28274 N of force. If your load is lighter, stepping down to the SC160 bore (10053 N at 0.5 MPa) can reduce air consumption and physical footprint. For strokes of 1500 mm, always assess side-load conditions; the 40 mm rod is substantial, but long unsupported strokes can still experience bending moments. Use an external guide rail or a guided cylinder if the load is not perfectly axial.
To ensure a direct replacement, match five key points: 200 mm bore, 1500 mm stroke, PT3/4 port thread, basic (no bracket) mounting, and the absence of a built-in magnet. This cylinder is a tie-rod design, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC200 tie-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500 FAQ
At the standard operating pressure of 0.5 MPa, the push force is 15708 N and the pull force is 15080 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 28274 N. The theoretical maximum force at 1.0 MPa is 3204 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than a standard ISO 15552 cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC200 tie-rod cylinder with the same bore, stroke, PT port thread, and basic mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X1500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.