Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S
The AirTAC Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S is a genuine double-acting standard air cylinder with a Ø200mm bore and 220mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ200 mm
- Stroke220 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 33 mm
About the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S
The AirTAC SC200X220S is a large-bore double-acting tie-rod cylinder delivering 15708 N of push force at 0.5 MPa and up to 28274 N at the maximum operating pressure of 0.9 MPa. With a 40 mm diameter piston rod and a 220 mm stroke, this model is built for heavy industrial linear motion where substantial force is required in a compact footprint.
This cylinder features a built-in magnet (suffix -S) along the barrel, allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors for precise end-of-stroke or mid-stroke position feedback. The standard PT1/2 port, TPU seals with a -20 to +70 °C range, and a 33 mm adjustable air cushion ensure reliable, high-force operation and smooth deceleration.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S Technical Specifications
| Model | Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø200 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (approx.) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S Is Used
Heavy Press & Forming
Provides the high force (up to 28274 N) needed for stamping, bending, or pressing metal and composite parts in manufacturing cells.
Large Material Handling
Operates heavy-duty pushers, lifters, and pallet dispensers in warehouses, using the built-in magnet for reliable position confirmation at each cycle.
Industrial Automation Fixtures
Clamps and positions large weldments or engine blocks on automated assembly lines, with sensor feedback ensuring the fixture is fully engaged.
Is the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S the Right Cylinder?
Select the SC200X220S when your application requires a push force around 15708 N at standard plant air pressure. If your load is lighter, stepping down to a 160 mm bore reduces the push force to 10053 N at 0.5 MPa, saving energy and space. For even higher force demands, a 250 mm bore provides 24544 N at the same pressure. Always verify that your mounting and rod support can handle the generated force.
To ensure a direct replacement, match five key specifications: the 200 mm bore, 220 mm stroke, PT port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting configuration. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S FAQ
At 0.5 MPa, the push force is 15708 N and the pull force is 15080 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 28274 N. The theoretical maximum force at 1.0 MPa is 3204 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder. For a drop-in replacement, you must match another SC-series cylinder with the same 200 mm bore, 220 mm stroke, PT ports, and built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X220S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.