Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230
The AirTAC Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230 is a genuine double-acting standard air cylinder with a Ø200mm bore and 230mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ200 mm
- Stroke230 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 33 mm
About the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230
The AirTAC SC200X230 is a large-bore double-acting pneumatic cylinder delivering 15708 N of push force at 0.5 MPa (28274 N at the 0.9 MPa maximum operating pressure). Its 40 mm diameter piston rod and 33 mm adjustable air cushion make it well-suited for heavy linear actuation tasks requiring controlled deceleration.
With a 230 mm stroke and a body length A of 244 mm, this cylinder provides a compact yet powerful solution for pressing, clamping, and lifting applications. The PT3/4 port and M36x2 rod thread ensure robust air flow and secure tooling attachment for high-force industrial automation.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230 Technical Specifications
| Model | Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230 |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø200 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (approx.) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230
| SC | Standard tie-rod cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230 Is Used
Heavy-Duty Pressing
Generates up to 28274 N of force at 0.9 MPa for industrial press-fit, stamping, and forming operations requiring a robust 200 mm bore cylinder.
Pallet Lifting & Transfer
Provides 15708 N of push force at standard 0.5 MPa line pressure to lift and transfer heavy pallets or engine blocks in automated logistics and assembly lines.
Material Testing Jigs
The adjustable 33 mm air cushion allows precise end-of-stroke deceleration, protecting test fixtures and samples during high-cycle material fatigue or load testing.
Is the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230 the Right Cylinder?
For applications needing slightly less force, the 160 mm bore SC160 series provides 10053 N at 0.5 MPa. If your load exceeds 15708 N, step up to the SC250 series offering 24544 N. Always ensure the 40 mm rod is adequately supported for the 230 mm stroke; side loads can cause rod bearing wear. For replacement, match bore, stroke, PT3/4 port thread, basic mounting, and confirm the tie-rod body length A of 244 mm.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230 FAQ
At the standard 0.5 MPa operating pressure, the push force is 15708 N and the pull force is 15080 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 28274 N.
No. The AirTAC SC series is a tie-rod cylinder that is shorter than an equivalent ISO 15552 cylinder. It is only dimensionally interchangeable with another AirTAC SC200 tie-rod cylinder of the same stroke and port configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X230
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.