Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530
The AirTAC Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530 is a genuine double-acting standard air cylinder with a Ø200mm bore and 530mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ200 mm
- Stroke530 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 33 mm
About the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530
The AirTAC SC200X530 is a double-acting tie-rod cylinder delivering 15708 N of push force at 0.5 MPa and up to 28274 N at 0.9 MPa operating pressure. With a 200 mm bore, 40 mm piston rod, and a 530 mm stroke, this cylinder is built for heavy linear actuation tasks where substantial force and moderate travel are required.
This model features a 244 mm body length (A dimension) and a 33 mm adjustable air cushion at each end to decelerate the piston smoothly. The standard PT3/4 port and M36x2 rod thread provide robust connections, while the TPU seals ensure reliable operation in standard temperatures from -20 to +70 °C.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530 Technical Specifications
| Model | Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530 |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø200 mm |
| Stroke | 530 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (approx.) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530
| SC | Standard tie-rod cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×530 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530 Is Used
Heavy Material Lifting
Provides the high force needed for lifting and positioning heavy pallets or machinery components in industrial material handling stations.
Press-Fit Assembly
Delivers controlled, high-force linear motion for pressing bearings, bushings, or pins into housings on assembly lines.
Agricultural Equipment Actuation
Operates heavy gates, chutes, or compactors in agricultural processing machinery, handling dusty environments with its robust tie-rod construction.
Is the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530 the Right Cylinder?
Choose the SC200X530 when your application needs roughly 15.7 kN of force at standard plant air pressure. If your load is lighter, stepping down to the SC160 bore (10053 N at 0.5 MPa) can reduce air consumption and physical size. For strokes of this length, ensure the load is guided externally; a 40 mm rod extending 530 mm is vulnerable to bending under side load, so use a guide rail or rod-alignment coupler to protect the rod bearing and seals.
For a direct replacement, match five key points: 200 mm bore, 530 mm stroke, PT port thread, basic mounting (no bracket), and no magnet. This SC cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530 FAQ
At 0.5 MPa, the push force is 15708 N and the pull force is 15080 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 28274 N. The theoretical maximum force at 1.0 MPa is 3204 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall length than a comparable ISO 15552 cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC200 tie-rod cylinder matching the same bore, stroke, port thread, and mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X530
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.