Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S
The AirTAC Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S is a genuine double-acting standard air cylinder with a Ø200mm bore and 600mm stroke, PT3/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ200 mm
- Stroke600 mm
- Port sizePT3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 33 mm
About the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S
The SC200X600S delivers a substantial 15708 N of push force at 0.5 MPa, scaling to 28274 N at the maximum operating pressure of 0.9 MPa. This 200 mm bore tie-rod cylinder features a 40 mm diameter piston rod and a 33 mm adjustable air cushion at each end, providing smooth deceleration for heavy, high-inertia loads moving through a 600 mm stroke.
A built-in magnet is specified with the -S suffix, allowing direct mounting of CMSG, DMSG, or EMSG sensors on the barrel for non-contact position feedback. The body length A is 244 mm, and the standard PT1/2 port thread supplies the large air volume this bore demands. This genuine AirTAC actuator is built for reliable, high-force linear motion in demanding industrial environments.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S Technical Specifications
| Model | Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S |
|---|---|
| Series | SC big-bore tie-rod cylinder (ISO 6430 class) |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (approx.) | 3204 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 200 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S Is Used
Heavy Pallet Transfer
Pushes or pulls loaded pallets on a conveyor transfer car, using the 15.7 kN force at 0.5 MPa to reliably shift multi-ton loads between lines.
Press-Fit Assembly Station
Provides the high, controlled force needed to press bearings, bushings, or pins into large housings, with magnetic sensors confirming full insertion depth.
Log Saw or Veneer Clamp
Clamps large-diameter logs or veneer stacks in sawmill and plywood equipment, where the 600 mm stroke accommodates wide material and the cushion absorbs clamp impact.
Is the Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S the Right Cylinder?
The SC200 bore is a high-force class actuator, ideal when the SC160's 10053 N at 0.5 MPa is insufficient. For even greater force, the SC250 provides 24544 N at the same pressure. At a 600 mm stroke, the 40 mm rod is robust, but any significant side load requires an external guide or linear rail system to protect the rod bearing and piston seals from premature wear.
For a direct replacement, match the 200 mm bore, 600 mm stroke, PT1/2 port thread, and the -S magnet option. The basic mounting configuration uses the cylinder's inherent tie-rod end-plate mounting holes. Ensure the replacement has the same sensor compatibility if your control system relies on the barrel-mounted magnetic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S FAQ
At 0.7 MPa operating pressure, the theoretical push force is 21991 N. The maximum push force at 0.9 MPa is 28274 N. Always size your application based on the force at your actual working pressure.
Yes. The -S suffix in the model code SC200X600S indicates a built-in magnet is installed on the piston. This allows you to clamp compatible CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel for end-of-stroke or mid-stroke position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC200-250 Tie-Rod Cylinder Aluminum Alloy SC200X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.