Airtac SCJ32 Standard Cylinder SCJ32X150-10S
The AirTAC Airtac SCJ32 Standard Cylinder SCJ32X150-10S is a genuine double-acting SINGLE-ROD air cylinder with a rear-cap ADJUSTING SCREW: the stroke end is field-adjustable within a 10 mm range without swapping the cylinder. Ø32mm bore, 150mm nominal stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Nominal stroke150 mm
- Stroke adjust-10 mm
- Port sizePT1/8
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SCJ32 Standard Cylinder SCJ32X150-10S
The SCJ32X150-10S is a 32 mm bore, single-rod double-acting cylinder with a rear-cap adjusting screw that provides up to 10 mm of field-adjustable stroke-end variation. With a 12 mm rod and PT1/8 ports, it delivers 402 N of push force at 0.5 MPa, making it a precise solution for fine-tuning end positions in compact automation cells.
The built-in magnet allows direct mounting of CMSG, DMSG, or EMSG sensors for reliable end-of-stroke detection. Its 182 mm body length and 21 mm air cushion ensure smooth deceleration, while the standard TPU seals and PT threads suit general industrial environments from -20 to +70 °C.
Airtac SCJ32 Standard Cylinder SCJ32X150-10S Technical Specifications
| Model | Airtac SCJ32 Standard Cylinder SCJ32X150-10S |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 150 mm |
| Stroke adjustment | Up to 10 mm (rear adjusting screw) |
| Acting type | Double acting (single rod) |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The rear adjusting screw sets the stroke end position; force is the same as the equivalent single-rod SC bore. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
SCJ is single-rod, so force matches the equivalent SC bore: push uses the full bore area, pull subtracts the rod area. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac SCJ32 Standard Cylinder SCJ32X150-10S
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Nominal (maximum) stroke length in mm. |
| -10 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SCJ32 Standard Cylinder SCJ32X150-10S Is Used
Commissioning Fine-Tuning
Ideal for setup technicians who need to tweak the stroke end by up to 10 mm during initial machine commissioning without changing the cylinder body or mounting brackets.
Wear Compensation
In high-cycle pick-and-place systems, the adjustable screw compensates for gripper pad wear over time, maintaining precise contact without reprogramming the controller.
Small-Part Clamping
Perfect for light clamping fixtures where the final clamp position must be set mechanically to avoid crushing delicate components, using the 10 mm adjustment range.
Is the Airtac SCJ32 Standard Cylinder SCJ32X150-10S the Right Cylinder?
Choose the SCJ32X150-10S when you need to dial in a stroke end without swapping cylinders. If 402 N of push force is insufficient, stepping up to the 40 mm bore provides 628 N at the same pressure. For applications requiring a fixed, non-adjustable stroke, the standard SC series is a more economical choice. This model directly replaces any AirTAC SCJ32X150-10S with PT ports, a basic mount, and a magnet, ensuring drop-in compatibility for maintenance teams.
Adjustable-stroke checklist
- ✓ Need to fine-tune stroke on the line?
- ✓ Nominal stroke + adjust range (-10)
- ✓ Required force at your working pressure
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear adjusting screw, then lock it before running.
- check Adjust end cushion screws for smooth stops.
- check Use SCJ mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac SCJ32 Standard Cylinder SCJ32X150-10S FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N due to the 12 mm rod area. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
You can, but the SCJ adds a rear adjusting screw, making the body slightly longer. It is a direct replacement only if you need the 10 mm stroke-end adjustment. For a fixed stroke, use the SC series.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCJ Adjustable-Stroke Cylinders
Request a Quote for Airtac SCJ32 Standard Cylinder SCJ32X150-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.