Airtac SCJ32 Standard Cylinder SCJ32X200-10
The AirTAC Airtac SCJ32 Standard Cylinder SCJ32X200-10 is a genuine double-acting SINGLE-ROD air cylinder with a rear-cap ADJUSTING SCREW: the stroke end is field-adjustable within a 10 mm range without swapping the cylinder. Ø32mm bore, 200mm nominal stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Nominal stroke200 mm
- Stroke adjust-10 mm
- Port sizePT1/8
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SCJ32 Standard Cylinder SCJ32X200-10
The SCJ32X200-10 is a double-acting, single-rod pneumatic cylinder with a field-adjustable stroke end, letting you fine-tune the 200 mm nominal stroke by up to 10 mm using the rear-cap adjusting screw. This 32 mm bore unit delivers 402 N of push force and 345 N of pull force at 0.5 MPa, moving loads with a 12 mm diameter piston rod. Its tie-rod construction and adjustable air cushion at both ends provide reliable deceleration, with a cushion length of 21 mm.
This genuine AirTAC SCJ cylinder is built for commissioning and format-change flexibility. The M10x1.25 rod thread and PT1/8 ports keep it compatible with standard pneumatic fittings. The body length A(SCJ) measures 182 mm, making it a compact solution where stroke-end position needs on-machine tweaking without swapping the cylinder or adding external hard stops.
Airtac SCJ32 Standard Cylinder SCJ32X200-10 Technical Specifications
| Model | Airtac SCJ32 Standard Cylinder SCJ32X200-10 |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Stroke adjustment | Up to 10 mm (rear adjusting screw) |
| Acting type | Double acting (single rod) |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The rear adjusting screw sets the stroke end position; force is the same as the equivalent single-rod SC bore. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
SCJ is single-rod, so force matches the equivalent SC bore: push uses the full bore area, pull subtracts the rod area. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac SCJ32 Standard Cylinder SCJ32X200-10
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal (maximum) stroke length in mm. |
| -10 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SCJ32 Standard Cylinder SCJ32X200-10 Is Used
Commissioning & Fine-Tuning
The 10 mm rear-end adjustment lets technicians dial in the exact stroke end position during machine setup without changing the cylinder or adding shims, speeding up commissioning of small automation cells.
Format Changeover on Packaging Lines
Quickly adapt the push stroke for different box or carton sizes on a packaging machine. The adjustable stroke eliminates the need to stock multiple fixed-stroke cylinders for minor format variations.
Wear Take-Up in Clamping Fixtures
In a pneumatic clamping or pressing fixture, the 10 mm adjustment compensates for jaw or pad wear over time, maintaining consistent clamping force without replacing the actuator.
Is the Airtac SCJ32 Standard Cylinder SCJ32X200-10 the Right Cylinder?
Choose this 32 mm bore when your application needs up to 402 N of push force at standard plant air pressure. If you require more force, stepping up to the 40 mm bore provides 628 N of push force at the same 0.5 MPa. For applications where the stroke never needs adjustment, the fixed-stroke SC32X200 is a simpler, cost-effective alternative. This SCJ model is a direct dimensional replacement for another AirTAC SCJ32 cylinder with a 200 mm nominal stroke and 10 mm adjustment range, provided the port thread (PT) and basic mounting match. For strokes of 200 mm, verify that side loads are minimal; if the rod experiences lateral force, consider adding an external guide rail to prevent bending.
Adjustable-stroke checklist
- ✓ Need to fine-tune stroke on the line?
- ✓ Nominal stroke + adjust range (-10)
- ✓ Required force at your working pressure
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear adjusting screw, then lock it before running.
- check Adjust end cushion screws for smooth stops.
- check Use SCJ mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac SCJ32 Standard Cylinder SCJ32X200-10 FAQ
At 0.5 MPa, this 32 mm bore cylinder produces 402 N of push force and 345 N of pull force. The push force is higher because the single rod reduces the effective piston area on the return stroke. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
A screw in the rear end cap acts as an adjustable internal stop for the piston. Turning the screw changes the stroke end position by up to 10 mm, shortening the 200 mm nominal stroke. It adjusts the mechanical stop point, not the air pressure or speed, and does not lock the rod in place when air is off.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCJ Adjustable-Stroke Cylinders
Request a Quote for Airtac SCJ32 Standard Cylinder SCJ32X200-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.