Airtac SCJ32 Standard Cylinder SCJ32X200-10S
The AirTAC Airtac SCJ32 Standard Cylinder SCJ32X200-10S is a genuine double-acting SINGLE-ROD air cylinder with a rear-cap ADJUSTING SCREW: the stroke end is field-adjustable within a 10 mm range without swapping the cylinder. Ø32mm bore, 200mm nominal stroke, PT1/8 ports and adjustable end cushioning.
- BoreØ32 mm
- Nominal stroke200 mm
- Stroke adjust-10 mm
- Port sizePT1/8
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
About the Airtac SCJ32 Standard Cylinder SCJ32X200-10S
The SCJ32X200-10S is a compact double-acting, single-rod cylinder that delivers 402 N of push force at 0.5 MPa, making it ideal for light-duty positioning and clamping tasks. Its rear-cap adjusting screw provides a 10 mm stroke-end adjustment range, allowing operators to fine-tune the piston stop position without removing the cylinder from the machine.
This model features a built-in magnet (suffix -S) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection. With a 12 mm diameter piston rod, PT1/8 ports, and a 21 mm air cushion, it offers reliable deceleration. The body length A(SCJ) is 182 mm, providing a compact footprint for space-constrained applications.
Airtac SCJ32 Standard Cylinder SCJ32X200-10S Technical Specifications
| Model | Airtac SCJ32 Standard Cylinder SCJ32X200-10S |
|---|---|
| Series | SCJ adjustable-stroke tie-rod cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Stroke adjustment | Up to 10 mm (rear adjusting screw) |
| Acting type | Double acting (single rod) |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SCJ (adjustable-stroke) datasheet. The rear adjusting screw sets the stroke end position; force is the same as the equivalent single-rod SC bore. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
SCJ is single-rod, so force matches the equivalent SC bore: push uses the full bore area, pull subtracts the rod area. Actual usable force is lower than theoretical due to friction and back-pressure; size with a safety margin.
Model Code: Airtac SCJ32 Standard Cylinder SCJ32X200-10S
| SCJ | Adjustable-stroke tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal (maximum) stroke length in mm. |
| -10 | Adjustable-stroke range in mm (options 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for sensor position sensing. |
Related types: SC (single rod, fixed stroke), SCD (double rod), SCT (multi-position). SCJ mounting: Basic, FA, LB, TC, TCM1. Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SCJ32 Standard Cylinder SCJ32X200-10S Is Used
Commissioning Fine-Tuning
The 10 mm adjustment screw lets technicians precisely set the retract or extend stop during machine setup, eliminating the need for shims or custom hard stops.
Small-Part Clamping
Adjust the stroke end to accommodate slight variations in workpiece thickness in a clamping fixture, ensuring consistent pressure without crushing delicate components.
Diverter Gate Actuation
Fine-tune the gate's open position on a small conveyor line to perfectly align with different chute widths, using the built-in magnet for gate-closed confirmation.
Is the Airtac SCJ32 Standard Cylinder SCJ32X200-10S the Right Cylinder?
Choose the SCJ32X200-10S when you need a 200 mm nominal stroke with the ability to dial in the final position by up to 10 mm during commissioning or changeovers. If more force is required, step up to the SCJ40 series, which provides 628 N of push force at the same pressure. For applications needing a fixed, non-adjustable stroke, the standard SC32X200 cylinder is a direct alternative.
This cylinder is a direct replacement for any AirTAC SCJ32X200-10S with PT ports, a basic mount, and a magnet. For strokes of 200 mm, the 12 mm rod is robust for axial loads, but avoid significant side loading without an external guide rail to prevent rod bending and premature seal wear.
Adjustable-stroke checklist
- ✓ Need to fine-tune stroke on the line?
- ✓ Nominal stroke + adjust range (-10)
- ✓ Required force at your working pressure
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Set the rear adjusting screw, then lock it before running.
- check Adjust end cushion screws for smooth stops.
- check Use SCJ mounting accessory (FA / LB / TC / TCM1).
- check Installation by qualified personnel per AirTAC docs.
Airtac SCJ32 Standard Cylinder SCJ32X200-10S FAQ
At the standard 0.5 MPa operating pressure, it produces 402 N of push force and 345 N of pull force. The maximum push force at 0.9 MPa is 724 N. The pull force is lower due to the area of the 12 mm piston rod.
Yes, it is a direct form-and-function replacement for any AirTAC SCJ32 cylinder with a 200 mm nominal stroke, 10 mm adjustable range, PT ports, and a magnetic piston. Ensure your mounting style matches; this is the basic mount version without brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SCJ Adjustable-Stroke Cylinders
Request a Quote for Airtac SCJ32 Standard Cylinder SCJ32X200-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.