Airtac SE32 Standard Cylinder SE32BX250SH
The AirTAC SE32 Standard Cylinder SE32BX250SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 250mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke250 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX250SH
The AirTAC SE32BX250SH is a double-acting single-rod profile cylinder built to the ISO 15552 dimension standard, delivering 402 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The integrated SUS304 stainless steel rod and FKM Viton seals expand the operating temperature range up to 150 C, making the unit highly suitable for washdown or chemically aggressive environments.
This 32 mm bore model includes a built-in magnet for non-contact position sensing using AirTAC CMSE reed or DMSE electronic switches fitted into the sensor grooves on three sides of the barrel. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard mechanical impacts during high-speed cycling. The cylinder operates at pressures from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa.
Airtac SE32 Standard Cylinder SE32BX250SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX250SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX250SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX250SH Is Used
Lab Diagnostic Equipment
The 402 N push force and FKM seals withstand 150 C thermal cycling in PCR thermal cycler lid mechanisms, while the SUS304 rod resists chemical sterilization.
Food Packaging Ejector
A 250 mm stroke provides the reach needed to push formed trays out of sealing dies, with the no-tie-rod extruded body preventing bacterial traps.
Small Parts Sorter
The integrated magnet triggers DMSE electronic sensors to confirm part ejection strokes in high-speed sorting lanes running up to 800 mm/s.
Is the Airtac SE32 Standard Cylinder SE32BX250SH the Right Cylinder?
Delivering 402 N push at 0.5 MPa, this 32 mm bore cylinder is a compact choice for lower-force tasks. If your application requires less energy, the adjacent 25 mm bore offers a smaller footprint, while stepping up to the 40 mm bore provides a stronger 628 N push at 0.5 MPa. Because this is a 250 mm stroke, the unsupported piston rod length increases bending moments under side loads; for optimal service life, use an external guide to prevent rod-bearing wear. The plain SE series does not hold position when air is lost—add a BSE rod lock variant if fail-safe holding is required. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard ISO 15552 mounting interface using PT1/8 ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX250SH FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf at 1.0 MPa.
Yes. The SE32BX250SH is dimensionally interchangeable per ISO 15552, serving as a direct replacement for standard mounting hardware. It uses a PT1/8 port and features field-adjustable air cushions at both ends to manage end-stop impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX250SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.