Airtac SE32 Standard Cylinder SE32BX260S
The AirTAC SE32 Standard Cylinder SE32BX260S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke260 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX260S
The AirTAC SE32BX260S is a double-acting, single-rod ISO 15552 profile cylinder engineered for precise linear motion. It delivers 402 N of push force and 345 N of pull force at 0.5 MPa, making it well-suited for lighter-duty automation. The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corner damage and corrosion.
This specific configuration features a SUS304 stainless steel rod (code B) for superior corrosion resistance in washdown or chemically active environments. The built-in magnet (code S) supports position sensing via AirTAC CMSE reed or DMSE electronic switches, while the field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration for smoother operation.
Airtac SE32 Standard Cylinder SE32BX260S Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX260S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX260S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX260S Is Used
Flow Wrapper End-Seal Jaws
Drives the rotary-to-linear motion for end-seal cutting jaws on horizontal flow wrappers, utilizing the 260 mm stroke and 402 N push to cleanly crimp packaging film.
Lab Dispensing Head Actuation
Actuates precision liquid dispensing heads in diagnostic analyzers, where the SUS304 rod prevents corrosion from chemical splashes and the -S magnet tracks fill cycles.
Pallet Diverter Gate
Shifts lightweight diverter gates on conveyor lines, relying on the adjustable pneumatic cushion to soften the 260 mm stroke impact and prevent pallet jarring.
Is the Airtac SE32 Standard Cylinder SE32BX260S the Right Cylinder?
Stepping down is not an option as the 32 mm bore is the smallest available in the SE range. If your application requires greater thrust, stepping up to the 40 mm bore provides 628 N of push force at 0.5 MPa. Keep in mind that a standard SE cylinder relies on live air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift. For load-holding without continuous pressure, consider the BSE rod-lock variant.
For a direct ISO 15552 replacement, match the 32 mm bore, 260 mm stroke, PT1/8 port, and your required mounting accessory. Because the stroke is 260 mm, the 12 mm rod and rod-end thread M10x1.25 carry an inherent risk of bending under lateral stress; an external guide is recommended to prevent side-load damage to the rod bearing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX260S FAQ
The SE32BX260S generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 563 N. The maximum allowable push force is 82 kgf at 1.0 MPa.
Yes, the SE32BX260S is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other standard profile cylinders. You can reuse existing mounting hardware and utilize the built-in magnet with AirTAC CMSE or DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX260S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.