Airtac SE32 Standard Cylinder SE32BX350
The AirTAC SE32 Standard Cylinder SE32BX350 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke350 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX350
The AirTAC SE32BX350 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 32mm bore and 350mm stroke. It provides 402N of push force at 0.5MPa and utilizes a PT1/8 port. Equipped with a SUS304 stainless steel rod (code B), it is purpose-built for corrosive environments and washdown applications where a standard medium-carbon steel piston would fail prematurely.
The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting surface corrosion. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, protecting moving components from hard mechanical impacts. This specific SKU lacks a built-in magnet, meaning it cannot host CMSE or DMSE position sensors without modification.
Airtac SE32 Standard Cylinder SE32BX350 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX350 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX350
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX350 Is Used
Lab Washdown Diverter
The SUS304 rod withstands chemical washdowns in pharmaceutical fluid diverters, providing 402N push at 0.5MPa to actuate 350mm stroke routing valves.
Pouch Sorting Gate
Drives a 350mm lane sorting gate in food packaging lines, where the stainless rod prevents corrosion and the tie-rod-free profile resists debris buildup.
PCB Conveyor Stop
Acts as a 350mm stroke pneumatic stopper on electronics conveyor lines, using its adjustable end cushions to soften the 402N impact of arriving PCB carriers.
Is the Airtac SE32 Standard Cylinder SE32BX350 the Right Cylinder?
Generating 402N of push force at 0.5MPa, this 32mm bore is the smallest in the SE lineup. If your application requires less thrust, you must look outside the SE series, but if you need more power, stepping up to the 40mm bore yields 628N of push at 0.5MPa. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or a valve centers; for position holding, consider a BSE rod lock variant. At a 350mm stroke, the unsupported rod length increases bending moments on the rod bearing under heavy lateral loads, so utilizing an external guide rail is highly recommended.
For retrofitting, this cylinder is dimensionally interchangeable per ISO 15552 standards. Match the 32mm bore, 350mm stroke, PT1/8 port, basic mounting, and note the SUS304 rod and lack of a sensor magnet when ordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX350 FAQ
The SE32BX350 generates 402N push and 345N pull at 0.5MPa, 563N push at 0.7MPa, and a maximum push of 82kgf at 1.0MPa. Its operating speed range is 30-800 mm/s.
Yes, the SE32BX350 is dimensionally interchangeable per ISO 15552 mounting dimensions, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/8 port and features a SUS304 stainless steel rod for washdown duty.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX350
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.