Airtac SE32 Standard Cylinder SE32BX350SH
The AirTAC SE32 Standard Cylinder SE32BX350SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke350 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE32 Standard Cylinder SE32BX350SH
The AirTAC SE32BX350SH is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding environments. It features a 32mm bore and a 350mm stroke, generating 402N of push force at 0.5 MPa. Equipped with a SUS304 stainless steel rod and Viton (FKM) seals, it withstands corrosive washdowns and high temperatures up to 150 C.
The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement across three integrated grooves. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycling. The built-in magnet enables seamless position tracking with CMSE reed or DMSE electronic sensors.
Airtac SE32 Standard Cylinder SE32BX350SH Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32BX350SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32BX350SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32BX350SH Is Used
Lab Washdown Equipment
The SUS304 rod and FKM seals resist harsh chemical sterilization in automated laboratory rinsing racks, providing 402N of push force for 350mm linear indexing.
Food Packaging Indexing
Drives product diverters on stainless steel conveyor lines in high-temperature food packaging facilities, utilizing the corrosion-resistant Viton seals for steam washdowns.
Bending Press Ejection
Ejects formed metal components from a small pneumatic bending press, where the 350mm stroke and adjustable end-cushions soften the retraction stop at 800 mm/s.
Is the Airtac SE32 Standard Cylinder SE32BX350SH the Right Cylinder?
Stepping up to the 40mm bore yields 628N push at 0.5 MPa for heavier payloads, while the 32mm bore itself is the smallest standard ISO 15552 size available in this series. Because this is a 350mm stroke, the unsupported piston rod is prone to bending under lateral loads; always use an external guide to prevent rod-bearing damage. As a standard ISO 15552 profile cylinder, it serves as a direct replacement for any matching bore and stroke footprint using PT1/8 ports and your preferred mounting accessory. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32BX350SH FAQ
At 0.5 MPa, the 32mm bore delivers 402N of push force and 345N of pull force. At 0.7 MPa, the push force is 563N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates between 30-800 mm/s and uses a PT1/8 port.
Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder matching a 32mm bore and 350mm stroke. However, the double-acting mechanism and adjustable air cushions do not function as a locking device; the piston will drift if air pressure is lost or the valve is centered. Use a BSE rod lock for true position holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32BX350SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.